Print Report | Back to Sample Detail

Sample Record for 2021-09-13-18

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 213337 DEA: 024F5404 EFIS: 0213000004 QA Service Level: 1
DIST-CO-RTE-PM: 02-SIS-5-R15.3/R16.5
Work Description: BRIDGE REPLACEMENT - SOUTHBOUND ONLY
Location Description: SISKIYOU COUNTY NEAR WEED FROM 0.1 MILE SOUTH OF DEETZ ROAD UNDERCROSSING TO 0.6 MILE NORTH OF BLACK BUTTE OVERHEAD 02-0004L
Contractor Name: J.F. SHEA CONSTRUCTION
Contractor Address: P.O. BOX 494519, REDDING, CA 96049-4519
Resident Engineer: Jeff Steppat Structure Rep.: Andy O'Sullivan

Sample Information

DIME Sample ID: 2021-09-13-18
TL Number from the TL Form: 815603
Sample Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Sample Organization Contact: (530) 225-3194
Type of Sample: Acceptance
Type of Material: Aggregate
Sample Taken Date: 09/13/2021
Date that the sample was received by the laboratory/organization performing the testing: 09/13/2021
The quantity of what the sample constitutes: Production Start-Up Evaluation
A brief description of the sample: Combined Treated 3/4-inch Type A Aggregate
From where was the sample collected: Manufacturer
Laboratory sample identification: D78942
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: JF Shea Construction - Fawndale Rock and Asphalt - Redding, CA

Material Information

Source Identification (SMARA, name of Pit or Job Site): 91-45-0017
The fabricator's/manufacturer's product name for the sample: Unknown
The fabricator/manufacturer designation for the sample: Unknown
The plant number: Unknown
A detailed description of where the material sample was collected: Mathematically Combined Gradation
Where the material sample would have been placed if not sampled: 02 SIS 5
Primary Aggregate Nominal Size: 3/4 inch
The concrete mix design number:
Lot number: Unknown
Sublot number: Unknown
Aggregate Mix Number:

Test Results

Test 1 of 1

DIME Test ID: 2021-09-13-18-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 09/16/2021
Date Tested: 09/15/2021
Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Organization Address: 1657 Riverside Drive,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: 530-225-3194
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
What type of gradation is being tested? HMA Gradation
Cumulative percent passing the 1 1/2 in. sieve 100 %
Cumulative percent passing the 1 in. sieve 100 %
Cumulative percent passing the 3/4 in. sieve 99.1 %
Cumulative percent passing the 1/2 in. sieve 82 %
Cumulative percent passing the 3/8 in. sieve 71.3 %
Cumulative percent passing the 1/4 in. sieve 58.1 %
Cumulative percent passing the #4 sieve 49.9 %
Cumulative percent passing the #8 sieve 30.3 %
Cumulative percent passing the #16 sieve 19.8 %
Cumulative percent passing the #30 sieve 14 %
Cumulative percent passing the #50 sieve 9.9 %
Cumulative percent passing the #100 sieve 7.2 %
Cumulative percent passing the #200 sieve 5.61 %