Print Report | Back to Test Summary

Testing Report for 2021-08-20-45-3

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

DEA: 040A5394
EFIS: 0418000244
Project ID: 214114
QA Service Level: 1
DIST-CO-RTE-PM: 04-SOL-80,12-11.4/12.8, 2.1/2.8
Work Description: Widen EB SR-12 Connector, Construct 3 ramps & 2 box girder bridges, remove existing bridge, etc.
Location Description: I-80/I-680/Route 12 Interchange
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Fernando Dos Santos
Structure Rep.: Alejandro Lara

Sample Information

DIME Sample ID: 2021-08-20-45
TL Number from the TL Form:
Sample Submitted By Organization: CT D04 - DME / District Lab
Sample Organization Contact: (510) 507-3456
Type of Sample: Verification
Type of Material: Hot Mix Asphalt
Sample Taken Date: 8/20/2021
Date that the sample was received by the laboratory/organization performing the testing: 8/20/2021
The quantity of what the sample constitutes: 16 boxes of 1/2" Type A HMA with RAP
A brief description of the sample: 16 Boxes of HMA
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Syar Vallejo

Material Information

HMA Type: Type A HMA
HMA Grading: 1/2 inch
Lot number:
Sublot number:

Test Information

DIME Test ID: 2021-08-20-45-3
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Asphalt Binder Content)
Date Tested: 9/7/2021
Verified Date: 9/15/2021
Submitted By Organization: CT D04 - DME / District Lab
Organization Address: 21339 Cabot Blvd,
Organization City: Hayward
Organization State: CA
Organization Zipcode: 94545
Organization Email: mohammad.dehghan@dot.ca.gov
Organization Phone: (510) 507-3456
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified :

Submitted Test Results

Test procedure used?: Method A
Asphalt Binder Content: 6.15 %
Mass of HMA prior to ignition: 1546.1 g
Mass of aggregate remaining after ignition: 1421 g
Correction Factor (Percent by mass of HMA Specimen): 1.94 %
Moisture Content: no data
Test Temperature: 900 F