Print Report | Back to Test Summary

Testing Report for 2021-08-25-37-1

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

DEA: 101L2304
EFIS: 1020000163
Project ID: 215615
QA Service Level: 1
DIST-CO-RTE-PM: 10-SJ-4-5.4/13.4
Work Description: COLD PLANE ASPHALT CONCRETE PAVEMENT AND RESURFACE WITH HMA AND RHMA.
Location Description: SAN JOAQUIN COUNTY NEAR STOCKTON FROM 1 MILE EAST OF MIDDLE RIVER BRIDGE TO 0.1 MILE WEST OF JOHN TURK ROAD
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Troy Scheiber
Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2021-08-25-37
TL Number from the TL Form: C035044
Sample Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Sample Organization Contact: (916) 227-7302
Type of Sample: Acceptance
Type of Material: Asphalt Binder
Sample Taken Date: 8/25/2021
Date that the sample was received by the laboratory/organization performing the testing: 9/7/2021
The quantity of what the sample constitutes: 1 of 2 cans
A brief description of the sample: Asphalt Rubber Binder
From where was the sample collected: Job Site
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: George Reed - Clements Plant

Material Information

Performance Grade: PG 64-10
Modified: No
Lot number: 1
Sublot number: 1
Tank number:
Time of sample:
HMA Supplier: George Reed - Clements
Asphalt Binder Supplier: VSS Emultech - West Sacramento CA
Multigrade: Yes
Multigrade Type: PG 64-16 / PG 64-10

Test Information

DIME Test ID: 2021-08-25-37-1
Test Method: AASHTO T240-17: Standard Method of Test for Effect of Heat and Air on a Moving Film of Asphalt Binder (Rolling Thin-Film Oven Test)
Date Tested: 9/14/2021
Verified Date: 9/20/2021
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test: as per 2018 standard specs
Test Result Compliance: complies
Additional Comments When Verified :

Submitted Test Results

Is mass change based on one or two containers?: Two
Any material loss from containers during heating process/testing?: No
Mass of empty container #1: 173.736 grams
Mass of empty container #2: 169.465 grams
Mass of container #1 before test (m1i): 209.036 grams
Mass of container #2 before test (m2i): 205.027 grams
Mass of container #1 after test (m1f): 208.823 grams
Mass of container #2 after test (m2f): 204.848 grams
Average mass change: -0.553 percent