Print Report | Back to Test Summary

Testing Report for 2021-08-23-19-7

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

DEA: 061A9004
EFIS: 0621000018
Project ID: 215554
QA Service Level: 1
DIST-CO-RTE-PM: 06-KER-5-4.4/R15.8
Work Description: COLD PLANE & PLACE HMA & INDIVIDUAL SLAB REPLACEMENT.
Location Description: KERN COUNTY AT GRAPEVINE FROM 0.4 MILE NORTH OF LEBEC ROAD OVERCROSSING TO ROUTES 5/99 SEPARATION
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Isidro Perez
Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2021-08-23-19
TL Number from the TL Form: 772216
Sample Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Sample Organization Contact: (916) 227-7302
Type of Sample: Acceptance
Type of Material: Asphalt Binder
Sample Taken Date: 8/23/2021
Date that the sample was received by the laboratory/organization performing the testing: 8/31/2021
The quantity of what the sample constitutes: 1 can
A brief description of the sample: Asphalt Binder PG 70-10
From where was the sample collected: Job Site
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: San Joaquin Refinery, Bakersfield, CA

Material Information

Performance Grade: PG 70-10
Modified: No
Lot number: 1
Sublot number: 4
Tank number: 32001
Time of sample:
HMA Supplier: Vulcan Materials
Asphalt Binder Supplier: San Joaquin Refinery - Bakersfield CA
Multigrade: No
Multigrade Type:

Test Information

DIME Test ID: 2021-08-23-19-7
Test Method: AASHTO T313-19: Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
Date Tested: 9/14/2021
Verified Date: 9/14/2021
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test: Per 2018 standard specification
Test Result Compliance: complies
Additional Comments When Verified :

Submitted Test Results

Minimum test bath temperature at 240 s: 0.0 C
Maximum test bath temperature at 240 s: 0.0 C
Time of test load application: no data
File name of test data: no data
Time beam in bath: no data
Time test started: no data
Flags issued by software during test: no data
Correlation coefficient (R²): no data
Regression coefficient a: no data
Regression coefficient b: no data
Regression coefficient c: no data
Load at time 0.0: 0.0 mN
Deflection at time 0.0 s: 0.000 µm
Load at time 0.5 s: 0.0 mN
Deflection at time 0.5 s: 0.000 µm
Load at 60.0 s: 1002.0 mN
Beam deflection 60.0 s: 0.323 µm
Measured Stiffness Modulus 60.0 s: 250.000 mPa
Estimated Stiffness Modulus 60.0 s: 250.000 mPa
Difference between stiffness moduli 60.0 s: no data
Estimated m-value 60.0 s: 0.378