Print Report | Back to Sample Detail

Sample Record for 2021-09-01-8

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 215471 DEA: 120N5804 EFIS: 1214000063 MINOR: 12A1847 QA Service Level: 1
DIST-CO-RTE-PM: 12-ORA-57-15.0/15.5
Work Description: To improve Traffic Operation by Installing an overhead guide sign and roadside signs informing motorists of an upcoming mandatory exit ramp
Location Description: Orange County in the City of Anaheim, on southbound Route 57 between Lincoln Ave to E. La Palma Ave Undercrossing
Contractor Name: BC Rentals LLC. DBA BC Traffic Specialist
Contractor Address: 638 West Southern Ave, Orange Ca. 92865
Resident Engineer: Fathi Safadi Structure Rep.: charles leong

Sample Information

DIME Sample ID: 2021-09-01-8
TL Number from the TL Form: na
Sample Submitted By Organization: CT HQ - QASI Bay Area Field Office
Sample Organization Contact: (916) 284-6784
Type of Sample: Quality Assurance
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 09/01/2021
Date that the sample was received by the laboratory/organization performing the testing: 09/09/2021
The quantity of what the sample constitutes: 432
A brief description of the sample: Anchor Bolt Hardware 2.25"
From where was the sample collected: Fabricator
Laboratory sample identification: na
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Universal Industrial Sales, Inc

Material Information

Rocap Number(s): na
Heat Number(s): 190907
Nut Mfg. Lot Number(s): DECD
Washer Mfg. Lot Number(s): na
Bolt Specification: na
Bolt Length(s): NA
Nut Specification: A563-DH
Washer Specification: na
Finish: Plain
Diameter/Size: 2.25"
Bolt Mfg. Lot Number: na
Rocap Test Requirement(s): na
Lubricant Requirements(s): na

Test Results

Test 1 of 3

DIME Test ID: 2021-09-01-8-1
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 09/14/2021
Date Tested: 09/13/2021
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number DECD
Finish Coating Plain
Product Markings 2H DH N/D
Size 2.25 in
Bolt Length no data in
Hardness Reading Scale C Scale
Hardness Reading Average 30.47
Spacing Ok

Test 2 of 3

DIME Test ID: 2021-09-01-8-2
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 09/14/2021
Date Tested: 09/13/2021
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number DECD
Finish Coating Plain
Product Markings 2H DH N/D
Size 2.25 in
Bolt Length no data in
Hardness Reading Scale C Scale
Hardness Reading Average 30.3
Spacing Ok

Test 3 of 3

DIME Test ID: 2021-09-01-8-3
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 09/14/2021
Date Tested: 09/13/2021
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number DECD
Finish Coating Plain
Product Markings 2H DH N/D
Size 2.25 in
Bolt Length no data in
Hardness Reading Scale C Scale
Hardness Reading Average 28.48
Spacing Ok