Print Report | Back to Test Summary

Testing Report for 2021-08-30-37-1

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

DEA: 021J5104
EFIS: 0220000086
Project ID: 215393
QA Service Level: 1
DIST-CO-RTE-PM: 02-LAS,MOD-139-57.0/66.635,0.0/0.1
Work Description: PERFORM COLD IN-PLACE RECYCLING AND PLACE HOT MIX ASPHALT (TYPE A).
Location Description: LASSEN AND MODOC COUNTIES NEAR ADIN FROM 4.5 MILES SOUTH OF COUNTY ROAD A2 TO 0.1 MILE SOUTH OF ROUTE 299
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Mike Zdenek
Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2021-08-30-37
TL Number from the TL Form: 854925
Sample Submitted By Organization: CT D02 - North Region Materials Lab
Sample Organization Contact: (530) 225-3194
Type of Sample: Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 8/30/2021
Date that the sample was received by the laboratory/organization performing the testing: 8/31/2021
The quantity of what the sample constitutes: PSE 16 Boxes at 286 Tons
A brief description of the sample: 1/2 inch HMA A 25 RAP PG58-34M Albina
From where was the sample collected: Manufacturer
Laboratory sample identification: D78932
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Hat Creek Construction and Materials - Shaw Pit Facility - Lookout, CA

Material Information

HMA Type: Type A HMA
HMA Grading: 1/2 inch
Lot number: Unknown
Sublot number: Unknown

Test Information

DIME Test ID: 2021-08-30-37-1
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Date Tested: 8/31/2021
Verified Date: 9/13/2021
Submitted By Organization: CT D02 - North Region Materials Lab
Organization Address: 1657 Riverside Dr,MS-83
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: (530) 225-3194
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified :

Submitted Test Results

Number of tests: 1
Mass Determination: Air
Method Performed: Mechanical Agitation - Method A
Mass of container filled with water: 7336.6 grams
Mass of oven-dry sample in air for Sample 1: 1779.9 grams
Mass of container filled with the sample and water for Sample 1: 8384.3 grams
Temperature of Water: 77 °F
Specific Gravity for Sample 1: 2.431