Print Report | Back to Test Summary

Testing Report for 2021-08-31-35-3

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

DEA: 051N1704
EFIS: 0520000136
Project ID: 215530
QA Service Level: 1
DIST-CO-RTE-PM: 05-SB-135-1.0/R7.2
Work Description: Construct pavement using partial depth recycling and pave with RHMA
Location Description: CONSTRUCTION ON STATE HIGHWAY IN SANTA BARBARA COUNTY NEAR LOS ALAMOS FROM 0.3 MILE NORTH OF DEN STREET TO SAN ANTONIO CREEK BRIDGE
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Lilian Bennetzen
Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2021-08-31-35
TL Number from the TL Form: 210831A
Sample Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Sample Organization Contact: (916) 227-7302
Type of Sample: Acceptance
Type of Material: Asphalt Binder
Sample Taken Date: 8/31/2021
Date that the sample was received by the laboratory/organization performing the testing: 9/7/2021
The quantity of what the sample constitutes: 2 cans - load 8
A brief description of the sample: Asphalt Binder PG 64-10
From where was the sample collected: Job Site
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Granite Construction

Material Information

Performance Grade: PG 64-10
Modified: No
Lot number:
Sublot number:
Tank number:
Time of sample:
HMA Supplier: Granite
Asphalt Binder Supplier: Valero Marketing & Supply - Wilmington CA
Multigrade: No
Multigrade Type:

Test Information

DIME Test ID: 2021-08-31-35-3
Test Method: AASHTO T315-20: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Date Tested: 9/8/2021
Verified Date: 9/15/2021
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test: Per 2018 Standard Specifications RTFO
Test Result Compliance: complies
Additional Comments When Verified :

Submitted Test Results

Phase: RTFO residue
Test Plate Diameter: 25 mm
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 10.00 %
Stress Amplitude: 0.363 kPa
Phase Angle (δ) (for the 10 cycles): 82.0 degree
Complex Modulus (G*) (for the 10 measurements): 3.628 kPa
Test Temperature: 64.0 C
Dynamic Shear, G*/sin(δ): 3.66 kPa