Print Report | Back to Test Summary

Testing Report for 2021-08-23-27-5

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

DEA: 051N1704
EFIS: 0520000136
Project ID: 215530
QA Service Level: 1
DIST-CO-RTE-PM: 05-SB-135-1.0/R7.2
Work Description: Construct pavement using partial depth recycling and pave with RHMA
Location Description: CONSTRUCTION ON STATE HIGHWAY IN SANTA BARBARA COUNTY NEAR LOS ALAMOS FROM 0.3 MILE NORTH OF DEN STREET TO SAN ANTONIO CREEK BRIDGE
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Lilian Bennetzen
Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2021-08-23-27
TL Number from the TL Form: 023703 copy
Sample Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Sample Organization Contact: (916) 227-7302
Type of Sample: Acceptance
Type of Material: Asphalt Binder
Sample Taken Date: 8/23/2021
Date that the sample was received by the laboratory/organization performing the testing: 8/31/2021
The quantity of what the sample constitutes: 2 cans - load 1
A brief description of the sample: Asphalt Binder PG 64-10
From where was the sample collected: Job Site
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Granite Construction

Material Information

Performance Grade: PG 64-10
Modified: No
Lot number: 3
Sublot number:
Tank number:
Time of sample:
HMA Supplier: Granite Construction
Asphalt Binder Supplier: Valero Marketing & Supply - Wilmington CA
Multigrade: No
Multigrade Type:

Test Information

DIME Test ID: 2021-08-23-27-5
Test Method: AASHTO T313-19: Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
Date Tested: 9/8/2021
Verified Date: 9/13/2021
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test: Per 2018 Standard Specifications
Test Result Compliance: complies
Additional Comments When Verified :

Submitted Test Results

Minimum test bath temperature at 240 s: 0.0 C
Maximum test bath temperature at 240 s: 0.0 C
Time of test load application: no data
File name of test data: no data
Time beam in bath: no data
Time test started: no data
Flags issued by software during test: no data
Correlation coefficient (R²): no data
Regression coefficient a: no data
Regression coefficient b: no data
Regression coefficient c: no data
Load at time 0.0: 0.0 mN
Deflection at time 0.0 s: 0.000 µm
Load at time 0.5 s: 0.0 mN
Deflection at time 0.5 s: 0.000 µm
Load at 60.0 s: 0.0 mN
Beam deflection 60.0 s: 0.000 µm
Measured Stiffness Modulus 60.0 s: 38.100 mPa
Estimated Stiffness Modulus 60.0 s: 37.900 mPa
Difference between stiffness moduli 60.0 s: no data
Estimated m-value 60.0 s: 0.377