Print Report | Back to Test Summary

Testing Report for 2021-08-30-30-1

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

DEA: 021J5104
EFIS: 0220000086
Project ID: 215393
QA Service Level: 1
DIST-CO-RTE-PM: 02-LAS,MOD-139-57.0/66.635,0.0/0.1
Work Description: PERFORM COLD IN-PLACE RECYCLING AND PLACE HOT MIX ASPHALT (TYPE A).
Location Description: LASSEN AND MODOC COUNTIES NEAR ADIN FROM 4.5 MILES SOUTH OF COUNTY ROAD A2 TO 0.1 MILE SOUTH OF ROUTE 299
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Mike Zdenek
Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2021-08-30-30
TL Number from the TL Form: 848954
Sample Submitted By Organization: CT D02 - North Region Materials Lab
Sample Organization Contact: (530) 225-3194
Type of Sample: Acceptance
Type of Material: Aggregate
Sample Taken Date: 8/30/2021
Date that the sample was received by the laboratory/organization performing the testing: 8/31/2021
The quantity of what the sample constitutes: PSE at 286 Tons
A brief description of the sample: 1/2 inch combined lime treated coldfeed and RAP
From where was the sample collected: Manufacturer
Laboratory sample identification: D78933
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Hat Creek Construction and Materials - Shaw Pit Facility - Lookout, CA

Material Information

Source Identification (SMARA or name of Pit): 91-25-0008
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: Plant Sampler
Where the material sample would have been placed if not sampled: 02 LAS MOD 139
Primary Aggregate Nominal Size: 1/2 inch
The concrete mix design number:
Lot number: Unknown
Sublot number: Unknown

Test Information

DIME Test ID: 2021-08-30-30-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Date Tested: 9/1/2021
Verified Date: 9/9/2021
Submitted By Organization: CT D02 - North Region Materials Lab
Organization Address: 1657 Riverside Dr,MS-83
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: (530) 225-3194
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified :

Submitted Test Results

What type of gradation is being tested?: HMA Gradation
Does this test use 1/4 sieve? (question for HMA Gradation Type): Yes
Cumulative percent passing the 1 1/2 in. sieve: 100 %
Cumulative percent passing the 1 in. sieve: 100 %
Cumulative percent passing the 3/4 in. sieve: 100 %
Cumulative percent passing the 1/2 in. sieve: 99 %
Cumulative percent passing the 3/8 in. sieve: 87 %
Cumulative percent passing the 1/4 in. sieve: 70 %
Cumulative percent passing the #4 sieve: 57 %
Cumulative percent passing the #8 sieve: 38 %
Cumulative percent passing the #16 sieve: 26 %
Cumulative percent passing the #30 sieve: 19 %
Cumulative percent passing the #50 sieve: 14 %
Cumulative percent passing the #100 sieve: 10 %
Cumulative percent passing the #200 sieve: 7.7 %