Print Report | Back to Test Summary

Testing Report for 2021-07-01-36-10

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

DEA: ASCP
EFIS: ASCP
Project ID: 44444
QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for submitting Sample information for Asphalt Supplier Certification Program.
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown
Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2021-07-01-36
TL Number from the TL Form:
Sample Submitted By Organization: Marathon Petroleum
Sample Organization Contact: (661) 392-3630
Type of Sample: Verification
Type of Material: Asphalt Binder
Sample Taken Date: 7/1/2021
Date that the sample was received by the laboratory/organization performing the testing: 7/1/2021
The quantity of what the sample constitutes: 1 of 1
A brief description of the sample: 8
From where was the sample collected: Manufacturer
Laboratory sample identification: 070121-8
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Mojave, CA

Material Information

Performance Grade: PG64-16
Modified:
Lot number:
Sublot number:
Tank number:
Time of sample:
HMA Supplier:
Asphalt Binder Supplier: Marathon Petroleum
Multigrade:
Multigrade Type:

Test Information

DIME Test ID: 2021-07-01-36-10
Test Method: AASHTO T313-19: Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
Date Tested: 9/8/2021
Verified Date: 9/8/2021
Submitted By Organization: Marathon Petroleum
Organization Address: 1201 China Grade Loop,
Organization City: Bakersfield
Organization State: CA
Organization Zipcode: 93308
Organization Email: gdiaz@marathonpetroleum.com
Organization Phone: (661) 392-3630
General Comments for this Test: Submitted from ASCP bulk upload.
Test Result Compliance:
Additional Comments When Verified :

Submitted Test Results

Time test started: no data
Flags issued by software during test: no data
Correlation coefficient (R²): no data
Regression coefficient a: no data
Regression coefficient b: no data
Regression coefficient c: no data
Load at time 0.0: 0.0 mN
Deflection at time 0.0 s: 0.000 µm
Load at time 0.5 s: 0.0 mN
Deflection at time 0.5 s: 0.000 µm
Load at 60.0 s: 0.0 mN
Beam deflection 60.0 s: 0.000 µm
Measured Stiffness Modulus 60.0 s: no data
Estimated Stiffness Modulus 60.0 s: no data
Difference between stiffness moduli 60.0 s: no data
Estimated m-value 60.0 s: 0.314