Print Report | Back to Sample Detail

Sample Record for 2021-09-03-4

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 215589 DEA: 112N0084 EFIS: 1117000153 QA Service Level: 1
DIST-CO-RTE-PM: 11-IMP-7,8,78,86,98,111-Var
Work Description: METHACRYLATE BRIDGE DECKS, REPAIR SPALLS AND REPLACE JOINT SEALS.
Location Description: IMPERIAL COUNTY AT VARIOUS LOCATIONS.
Contractor Name: FEC Future Contractors & Engineers, Inc
Contractor Address: 184 Technology Dr., Ste 2, Irvine, CA 92618
Resident Engineer: David Toci Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2021-09-03-4
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Sample Organization Contact: (916) 594-1991
Type of Sample: Authorization
Type of Material: Methacrylate
Sample Taken Date: 09/03/2021
Date that the sample was received by the laboratory/organization performing the testing: 09/03/2021
The quantity of what the sample constitutes: 1 Quart Can
A brief description of the sample: HMWM
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Transpo Industries Inc

Material Information

Mfg. Lot Number(s): B0621217010
Batch number: B0621217010
Mix number: 3541
Test results on following page(s): 1

Test Results

Test 1 of 1

DIME Test ID: 2021-09-03-4-1
Test Method: CONCLP 4-16: HMWM
Verified Date: 09/03/2021
Date Tested: 09/03/2021
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: spencer.adams@dot.ca.gov
Organization Phone: (916) 227-5716
General Comments for this Test: Bond Strength was not performed due to material failing other tests. Tack Free time went past maximum time of 400 minutes and test was ended at 400 minutes.
Test Result Compliance: does not comply
Additional Comments When Verified:
Viscosity (ASTM D 2196) Brookfield RVT with UL adapter, 50 RPM @ 77 deg F, 25 max cps @ 77 deg F 27
Specific gravity (ASTM D 1475) 0.90 min @ 77 deg F 1.04
Volatile content (ASTM D 2369) 30% max 23.40
Flash point (ASTM D 3828) more than 180 deg F 180
PCC - SSD bond strength (CA Test 551) 500 psi minimum @ 24 hours no data psi
Tack free time, 400 minutes max 499