Print Report | Back to Test Summary

Testing Report for 2021-08-04-1-4

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

DEA: 081K1904
EFIS: 0818000207
Project ID: 215359
QA Service Level: 1
DIST-CO-RTE-PM: 08-SBD-15-16.1/169.4
Work Description: REMOVE, PREPARE AND FURNISH POLYESTER CONC OVERLAY & BRIDGE DECK.
Location Description: SAN BERNARDINO COUNTY IN AND NEAR HESPERIA AT VARIOUS LOCATIONS FROM CAJON CREEK TO MICRO DITCH.
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Thanh Pham
Structure Rep.: Monty Navarro

Sample Information

DIME Sample ID: 2021-08-04-1
TL Number from the TL Form: 1003-84
Sample Submitted By Organization: CT - Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Quality Assurance
Type of Material: Concrete
Sample Taken Date: 8/4/2021
Date that the sample was received by the laboratory/organization performing the testing: 8/4/2021
The quantity of what the sample constitutes: 8
A brief description of the sample: Concrete Cylinders
From where was the sample collected: Job Site
Laboratory sample identification: 1030-84
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Holliday

Material Information

The concrete mix design number: NA
The truck number from where the sample was collected: NA
The batch plant ticket number from where the sample was collected: 84
Concrete batch plant:
The fabricator/manufacturer designation for the sample:
A detailed description of where the material sample was collected: SITE
Where the material sample would have been placed if not sampled: Roy Rogers Drive OC
From Lot No.:
Bag Lot No.:

Test Information

DIME Test ID: 2021-08-04-1-4
Test Method: ASTM C39-18: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Date Tested: 9/1/2021
Verified Date: 9/1/2021
Submitted By Organization: CT - Southern Regional Laboratory
Organization Address: 13970 Victoria St,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: 213-792-4794
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified :

Submitted Test Results

Unit system used?: US Units
Number of specimens: 2
Test performed: With no density determined
Average diameter of cylinder 1: 6.02 in
Average diameter of cylinder 2: 6.00 in
Capped in accordance with?: ASTM C617 - Sulfur Mortar Cap
Cross sectional area of cylinder 1: 28.46 in^2
Cross sectional area of cylinder 2: 28.27 in^2
Compressive strength (to nearest 10 psi): 5190 psi
Maximum load on cylinder 1: 144580 lb
Maximum load on cylinder 2: 149900 lb
Compressive strength of cylinder 1: 5080.1 psi
Type of fracture pattern of cylinder 1: 1
Compressive strength of cylinder 2: 5302.4 psi
Type of fracture pattern of cylinder 2: 1
Comment on any defect in either specimen or caps (Max 250 Characters): no data
Correction factor for cylinder 1: 1
Correction factor for cylinder 2: 1
Age of specimen: 28 days
Age of specimen in hours: no data