Print Report | Back to Sample Detail

Sample Record for 2021-06-02-6

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 215245 DEA: 021J4504 EFIS: 0220000080 QA Service Level: 1
DIST-CO-RTE-PM: 02-SIS-89-14.0/19.0
Work Description: PLACE HMA (TYPE A).
Location Description: SISKIYOU COUNTY ABOUT 6 MILES NORTH OF BARTLE FROM 0.4 MILE NORTH OF EDISON CREEK ACCESS ROAD TO 2.0 MILES SOUTH OF MUD CREEK BRIDGE
Contractor Name: S.T. Rhoades Construction
Contractor Address: 8585 Commercial Way, Redding, CA 96002
Resident Engineer: Austin Henry Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2021-06-02-6
TL Number from the TL Form: 858980
Sample Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Sample Organization Contact: (530) 225-3194
Type of Sample: Acceptance
Type of Material: Aggregate
Sample Taken Date: 06/02/2021
Date that the sample was received by the laboratory/organization performing the testing: 06/02/2021
The quantity of what the sample constitutes: Production Start-Up Evaluation
A brief description of the sample: Treated Virgin 3/8-inch Type A Aggregate
From where was the sample collected: Manufacturer
Laboratory sample identification: D78819A
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: JF Shea Construction, Fawndale Rock and Asphalt, Redding, CA

Material Information

Source Identification (SMARA, name of Pit or Job Site): 91-45-0017
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: Sampling device at plant
Where the material sample would have been placed if not sampled:
Primary Aggregate Nominal Size: 3/8 inch
The concrete mix design number:
Lot number:
Sublot number:
Aggregate Mix Number:

Test Results

Test 1 of 2

DIME Test ID: 2021-06-02-6-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Organization Address: 1657 Riverside Drive, MS-83,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: (530) 225-3194
This test has been superseded on 08/23/2021. The corrected test ID is: 2021-06-02-6-2
Reason: retested

Test 2 of 2

DIME Test ID: 2021-06-02-6-2
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 08/23/2021
Date Tested: 08/23/2021
Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Organization Address: 1657 Riverside Drive,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: 530-225-3194
General Comments for this Test:
The test was superseded from test ID: 2021-06-02-6-1
Test Result Compliance:
Additional Comments When Verified:
What type of gradation is being tested? HMA Gradation
Cumulative percent passing the 1 1/2 in. sieve 100 %
Cumulative percent passing the 1 in. sieve 100 %
Cumulative percent passing the 3/4 in. sieve 100 %
Cumulative percent passing the 1/2 in. sieve 100 %
Cumulative percent passing the 3/8 in. sieve 96.4 %
Cumulative percent passing the 1/4 in. sieve 73.9 %
Cumulative percent passing the #4 sieve 61.1 %
Cumulative percent passing the #8 sieve 35 %
Cumulative percent passing the #16 sieve 21 %
Cumulative percent passing the #30 sieve 13.7 %
Cumulative percent passing the #50 sieve 9.6 %
Cumulative percent passing the #100 sieve 6.9 %
Cumulative percent passing the #200 sieve 5.37 %