Print Report | Back to Test Summary

Testing Report for 2021-07-13-24-2

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

DEA: 010H4604
EFIS: 0117000226
Project ID: 215600
QA Service Level: 1
DIST-CO-RTE-PM: 01-LAK-175-0.2/0.4
Work Description: ROADWAY EXCAVATION WITH CLASS 2 AGGREGATE BASE AND HMA (TYPE A).
Location Description: LAKE COUNTY ABOUT 10 MILES EAST OF HOPLAND FROM 0.2 MILE EAST OF THE MENDOCINO COUNTY LINE TO 0.4 MILE EAST OF THE MENDOCINO COUNTY LINE
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Dan Kraft
Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2021-07-13-24
TL Number from the TL Form: 934709
Sample Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Sample Organization Contact: (916) 227-7302
Type of Sample: Acceptance
Type of Material: Asphalt Binder
Sample Taken Date: 7/13/2021
Date that the sample was received by the laboratory/organization performing the testing: 7/26/2021
The quantity of what the sample constitutes: 1 can
A brief description of the sample: TEST Asphalt Binder
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Valero - Benicia

Material Information

Performance Grade: PG 58-22
Modified: No
Lot number:
Sublot number:
Tank number:
Time of sample:
HMA Supplier:
Asphalt Binder Supplier: Valero Marketing & Supply - Benicia CA
Multigrade: No
Multigrade Type:

Test Information

DIME Test ID: 2021-07-13-24-2
Test Method: AASHTO T315-20: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Date Tested: 8/4/2021
Verified Date: 8/12/2021
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test: Per 2018 Standard Specifications OG
Test Result Compliance: complies
Additional Comments When Verified :

Submitted Test Results

Phase: Original binder
Test Plate Diameter: 25 mm
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 12.00 %
Stress Amplitude: 0.237 kPa
Phase Angle (δ) (for the 10 cycles): 84.4 degree
Complex Modulus (G*) (for the 10 measurements): 1.973 kPa
Test Temperature: 58.0 C
Dynamic Shear, G*/sin(δ): 1.98 kPa