Print Report | Back to Test Summary

Testing Report for 2021-07-20-25-3

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

DEA: STOCK
EFIS: STOCK
Project ID: 88888
QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for SMTL stock material. Object Code: 1025. J2 DEA: 912680.
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown
Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2021-07-20-25
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (916) 227-7253
Type of Sample: Quality Assurance
Type of Material: SMTL TM2 - Type B Elastomeric Joint Seal
Sample Taken Date: 7/20/2021
Date that the sample was received by the laboratory/organization performing the testing: 7/23/2021
The quantity of what the sample constitutes: 550'
A brief description of the sample: Joint Seal
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Watson Bowman

Material Information

Mfg. Lot Number(s): 1321281
Manufacturer(s): Watson Bowman
Temperature: 72
Humidity: 50
Comments:
Joint Seal Size: 3.75"

Test Information

DIME Test ID: 2021-07-20-25-3
Test Method: ASTM D412-06a-re13: Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers-Tension
Date Tested: 8/2/2021
Verified Date: 8/10/2021
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified :

Submitted Test Results

UTM: 2kip
Humidity: 50.00 %
Temperature: 72 F
Sample 1 Median Thickness: 0.072
Sample 1 Thickness all Within 0.003 inch?: Yes
Sample 1 Ultimate Tensile: 2126.73
Sample 1 Elongation (350% Min): Pass
Sample 2 Median Thickness: 0.078
Sample 2 Thickness all Within 0.003 inch?: Yes
Sample 2 Ultimate Tensile: 1986.63
Sample 2 Elongation (350% Min): Pass
Sample 3 Median Thickness: 0.074
Sample 3 Thickness all Within 0.003 inch?: Yes
Sample 3 Ultimate Tensile: 2033.42
Sample 3 Elongation (350% Min): Pass
Sample 4 Median Thickness: 0.073
Sample 4 Thickness all Within 0.003 inch?: Yes
Sample 4 Ultimate Tensile: 2132.79
Sample 4 Elongation (350% Min): Pass
Sample 5 Median Thickness: 0.069
Sample 5 Thickness all Within 0.003 inch?: Yes
Sample 5 Ultimate Tensile: 1995.86
Sample 5 Elongation (350% Min): Pass
Median of the Ultimate Tensile Values: 2033.4 psi