Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 215679 DEA: 010J8604 EFIS: 0119000116
QA Service Level: 1
DIST-CO-RTE-PM: 01-DN-101,199-VAR
Work Description: FURNISH AND PLACE POLYESTER CONCRETE OVERLAY ON THE BRIDGE DECKS.
Location Description: DEL NORTE COUNTY AT VARIOUS LOCATIONS
Contractor Name: TRUESDELL CORP of CALIFORNIA INC
Contractor Address: 1310 W 23rd STREET, TEMPE, AZ 85282
Resident Engineer: Aaron Valley Structure Rep.: Joshua Lee
DIME Sample ID: 2021-07-26-2
TL Number from the TL Form: Sacramento Caltrans lab
Sample Submitted By Organization: Kwik Bond Polymers
Sample Organization Contact: (760) 518-6064
Type of Sample: Quality Control
Type of Material: Polyester
Sample Taken Date: 07/26/2021
Date that the sample was received by the laboratory/organization performing the testing: 07/26/2021
The quantity of what the sample constitutes: 2 tankers
A brief description of the sample: 1 gallon can
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Kwik Bond Polymers and Polynt
DIME Test ID: 2021-07-26-2-1
Test Method: ASTM D1475-Nov13: Standard Test Method For Density of Liquid Coatings, Inks, and Related Products
Verified Date: 07/30/2021
Date Tested: 07/26/2021
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: spencer.adams@dot.ca.gov
Organization Phone: (916) 227-5716
General Comments for this Test: Accepted vendor's results.
Test Result Compliance: complies
Additional Comments When Verified:
Density Units
|
pounds/gallons
|
Liquid Density (pounds per gallon)
|
9
|
DIME Test ID: 2021-07-26-2-2
Test Method: ASTM D2196-Feb15: Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscometer
Verified Date: 07/30/2021
Date Tested: 07/26/2021
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: spencer.adams@dot.ca.gov
Organization Phone: (916) 227-5716
General Comments for this Test: Accepted vendor's results.
Test Result Compliance: complies
Additional Comments When Verified:
DIME Test ID: 2021-07-26-2-3
Test Method: ASTM D2369-Jul10: Standard Test Method for Volatile Content of Coatings
Verified Date: 07/30/2021
Date Tested: 07/26/2021
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: spencer.adams@dot.ca.gov
Organization Phone: (916) 227-5716
General Comments for this Test: Accepted vendor's results.
Test Result Compliance: complies
Additional Comments When Verified:
Mean of two volatile content determination
|
46.56
|
DIME Test ID: 2021-07-26-2-4
Test Method: ASTM D638-Dec14: Standard Test Method for Tensile Properties of Plastics
Verified Date: 07/30/2021
Date Tested: 07/27/2021
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: spencer.adams@dot.ca.gov
Organization Phone: (916) 227-5716
General Comments for this Test: Accepted vendor's results.
Test Result Compliance: complies
Additional Comments When Verified:
Number of specimens tested
|
5
|
Conditioning procedure
|
18/25/50+5/70
|
Speed of testing
|
0.45 in/min
|
Sample 1 Width
|
0.487 in
|
Sample 1 Ultimate strength
|
3479.5 psi
|
Sample 1 Thickness
|
0.25 in
|
Sample 1 Area
|
0.1218 in^2
|
Sample 1 Ultimate Strength Actual
|
423.8 lbs
|
Sample 1 percent elongation
|
70.32 %
|
Sample 1 Time
|
0 MM:SS
|
Sample 2 Width
|
0.487 in
|
Sample 2 Thickness
|
0.255 in
|
Sample 2 Area
|
0.1242 in^2
|
Sample 2 Ultimate strength
|
3213.4 psi
|
Sample 2 Ultimate Strength Actual
|
399.1 lbs
|
Sample 2 percent elongation
|
64.52 %
|
Sample 2 Time
|
0 MM:SS
|
Sample 3 Width
|
0.485 in
|
Sample 3 Thickness
|
0.256 in
|
Sample 3 Area
|
0.1242 in^2
|
Sample 3 Ultimate strength
|
3445.2 psi
|
Sample 3 Ultimate Strength Actual
|
427.9 lbs
|
Sample 3 percent elongation
|
69.41 %
|
Sample 3 Time
|
0 MM:SS
|
Sample 4 Width
|
0.486 in
|
Sample 4 Thickness
|
0.255 in
|
Sample 4 Area
|
0.1239 in^2
|
Sample 4 Ultimate strength
|
3531.1 psi
|
Sample 4 Ultimate Strength Actual
|
437.5 lbs
|
Sample 4 percent elongation
|
71.24 %
|
Sample 4 Time
|
0 MM:SS
|
Sample 5 Width
|
0.549 in
|
Sample 5 Thickness
|
0.253 in
|
Sample 5 Area
|
0.1389 in^2
|
Sample 5 Ultimate strength
|
3019.4 psi
|
Sample 5 Ultimate Strength Actual
|
419.4 lbs
|
Sample 5 percent elongation
|
70.52 %
|
Sample 5 Time
|
0 MM:SS
|
Ultimate Strength Average
|
3338 psi
|
Percent Elongation Average
|
69 %
|
DIME Test ID: 2021-07-26-2-5
Test Method: CTM 551-August 2012: Method of Test for Determining Suitability of Materials for Overlayment and Repair of Portland Cement Concrete Pavements and Structures
Verified Date: 07/30/2021
Date Tested: 07/27/2021
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: spencer.adams@dot.ca.gov
Organization Phone: (916) 227-5716
General Comments for this Test: Accepted vendor's results.
Test Result Compliance: complies
Additional Comments When Verified:
Curing history for Sample 1
|
24hr
|
Maximum applied load (P) for Sample 1
|
1682 lb
|
Span length for Sample 1
|
9 in
|
Break location for Sample 1
|
bond
|
Specimen defects/notes for Sample 1
|
no data
|
Surface type for Sample 1
|
SSD
|
Modulus of rupture (R) for Sample 1
|
841 psi
|
Curing history for Sample 2
|
24hr
|
Maximum applied load (P) for Sample 2
|
1808 lb
|
Span length for Sample 2
|
9 in
|
Break location for Sample 2
|
bond
|
Specimen defects/notes for Sample 2
|
no data
|
Surface type for Sample 2
|
SSD
|
Modulus of rupture (R) for Sample 2
|
904 psi
|
Curing history for Sample 3
|
24hr
|
Maximum applied load (P) for Sample 3
|
1814 lb
|
Span length for Sample 3
|
9 in
|
Break location for Sample 3
|
bond
|
Specimen defects/notes for Sample 3
|
no data
|
Surface type for Sample 3
|
SSD
|
Modulus of rupture (R) for Sample 3
|
907 psi
|
DIME Test ID: 2021-07-26-2-6
Test Method: SCAQMD 309-91-Feb93: Determination of Static Volatile Emissions
Verified Date: 07/30/2021
Date Tested: 07/26/2021
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: spencer.adams@dot.ca.gov
Organization Phone: (916) 227-5716
General Comments for this Test: Accepted vendor's results.
Test Result Compliance: complies
Additional Comments When Verified:
Diameter of lid
|
153.9 mm
|
Room Temperature
|
75 f
|
Tare weight
|
no data
|
Initial weight
|
100 grams
|
Weight at 5 minutes
|
99.921 grams
|
Weight at 10 minutes
|
99.862 grams
|
Weight at 15 minutes
|
99.715 grams
|
Weight at 20 minutes
|
99.464 grams
|
Weight at 25 minutes
|
99.4 grams
|
Weight at 30 minutes
|
99.328 grams
|
Final weight
|
99.328 grams
|
Total weight loss
|
0.672 grams
|
Calculated radius of gallon can lid in cm
|
7.7 cm
|
Lid Factor
|
53.757 m^2
|
Volatile emission
|
36.125 grams/m^2
|