Print Report | Back to Test Summary

Testing Report for 2021-06-18-29-1

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

DEA: 120S2004
EFIS: 1219000105
Project ID: 215523
QA Service Level: 1
DIST-CO-RTE-PM: 12-ORA-22,57-R2.7/R11.9,18.8
Work Description: PLACE POLYESTER CONCRETE, REPLACE JOINT SEALS AND TREAT BRIDGE DECK.
Location Description: ORANGE COUNTY AT VARIOUS LOCATIONS ON ROUTE 22 FROM GARDEN GROVE BOULEVARD UNDERCROSSING TO GLASSELL STREET UNDERCROSSING AND ON ROUTE 57 AT BASTANCHURY ROAD UNDERCROSSING
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Jay Joubeen
Structure Rep.: Theodore Pham

Sample Information

DIME Sample ID: 2021-06-18-29
TL Number from the TL Form: C943077
Sample Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Sample Organization Contact: (916) 227-7283
Type of Sample: Quality Control
Type of Material: Methacrylate
Sample Taken Date: 6/18/2021
Date that the sample was received by the laboratory/organization performing the testing: 6/21/2021
The quantity of what the sample constitutes: 25000 gallons
A brief description of the sample: 2 pints 204, chp, z cure, 8020
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Kwik Bond Polymers, Benicia

Material Information

Mfg. Lot Number(s): 2170790889
Batch number: 2170790889
Mix number: 3524

Test Information

DIME Test ID: 2021-06-18-29-1
Test Method: CONCLP 4-16: HMWM
Date Tested: 7/15/2021
Verified Date: 7/30/2021
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: larry.mccrum@dot.ca.gov
Organization Phone: (916) 227-7283
General Comments for this Test: Bond Strength and Tack Free Accepted Based On Supplier Results.
Test Result Compliance: complies
Additional Comments When Verified :

Submitted Test Results

Viscosity (ASTM D 2196) Brookfield RVT with UL adapter, 50 RPM @ 77 deg F, 25 max cps @ 77 deg F: 20.86
Specific gravity (ASTM D 1475) 0.90 min @ 77 deg F: 7.58
Volatile content (ASTM D 2369) 30% max: 22.29
Flash point (ASTM D 3828) more than 180 deg F: 190
PCC - SSD bond strength (CA Test 551) 500 psi minimum @ 24 hours: 816.343
Tack free time, 400 minutes max: 280