Print Report | Back to Test Summary

Testing Report for 2021-07-14-6-3

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

DEA: 061C0014
EFIS: 0620000167
Project ID: 215606
QA Service Level: 1
DIST-CO-RTE-PM: 06-MAD-145-8.6
Work Description: PARKING LOT RESURFACING WITH COLD PLANE AND HOT MIX ASPHALT.
Location Description: MADERA COUNTY IN MADERA AT THE MADERA MAINTENANCE STATION AT 125 WEST ALMOND AVENUE
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Felix Vaquilar
Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2021-07-14-6
TL Number from the TL Form: 056164
Sample Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Sample Organization Contact: (916) 227-7302
Type of Sample: Acceptance
Type of Material: Asphalt Binder
Sample Taken Date: 7/14/2021
Date that the sample was received by the laboratory/organization performing the testing: 7/15/2021
The quantity of what the sample constitutes: 1 OF 1 CAN
A brief description of the sample: PG70-10
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: San Joaquin Refinery

Material Information

Performance Grade: PG 70-10
Modified: No
Lot number:
Sublot number:
Tank number:
Time of sample:
HMA Supplier:
Asphalt Binder Supplier: San Joaquin Refinery - Bakersfield CA
Multigrade: No
Multigrade Type:

Test Information

DIME Test ID: 2021-07-14-6-3
Test Method: AASHTO T315-16: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Date Tested: 7/19/2021
Verified Date: 7/23/2021
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test: RTFOas per 2018 standard specs
Test Result Compliance: complies
Additional Comments When Verified :

Submitted Test Results

Phase: RTFO residue
Test Plate Diameter: 25 mm
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 10.00 %
Stress Amplitude: 0.239 kPa
Phase Angle (δ) (for the 10 cycles): 88.8 degree
Complex Modulus (G*) (for the 10 measurements): 2.388 kPa
Test Temperature: 70.0 C
Dynamic Shear, G*/sin(δ): 2.39 kPa