Print Report | Back to Test Summary

Testing Report for 2021-06-23-15-4

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

DEA: 07286204
EFIS: 0713000217
Project ID: 210227
QA Service Level: 1
DIST-CO-RTE-PM: 07-LA-138-56.20/55.20
Work Description: WIDEN ROUTE 138 TO 4 LANES WITH A MEDIAN TURN LANE AND STANDARD WIDTH SHOULDERS.; DRAINAGE IMPROVEMENTS.
Location Description: IN LOS ANGELES COUNTY IN PALMDALE FROM 87TH STREET EAST TO 96TH STREET EAST
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Fred Tieu
Structure Rep.: George Boules

Sample Information

DIME Sample ID: 2021-06-23-15
TL Number from the TL Form:
Sample Submitted By Organization: CT - Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Verification
Type of Material: Aggregate
Sample Taken Date: 6/23/2021
Date that the sample was received by the laboratory/organization performing the testing: 6/28/2021
The quantity of what the sample constitutes: 5 Bags of Coldfeed Aggregate
A brief description of the sample: JMF 3/4" RHMA-G-SP 0.5% LAS
From where was the sample collected: Manufacturer
Laboratory sample identification: 0392G-21
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Granite Construction Company Bigrock

Material Information

Source Identification (SMARA or name of Pit): 91-19-0046
The fabricator's/manufacturer's product name for the sample: 3/4 RHMA-G-SP
The fabricator/manufacturer designation for the sample:
The plant number: 1556
A detailed description of where the material sample was collected: Belt Cut at Granite Construction Company Bigrock
Where the material sample would have been placed if not sampled: Asphalt Paving
Primary Aggregate Nominal Size: 3/4 inch
The concrete mix design number:
Lot number:
Sublot number:

Test Information

DIME Test ID: 2021-06-23-15-4
Test Method: AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)
Date Tested: 7/7/2021
Verified Date: 7/9/2021
Submitted By Organization: CT - Southern Regional Laboratory
Organization Address: 13970 Victoria St,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: 213-792-4794
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified :

Submitted Test Results

Grading designation: C
Mass of sample on No.12 sieve (after 500 revolutions): 3252 grams
Percent loss after 100 revolutions: 7 %
Percent loss after 500 revolutions: 35 %