Print Report | Back to Test Summary

Testing Report for 2021-04-23-25-3

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

DEA: 021J4604
EFIS: 0220000081
Project ID: 215251
QA Service Level: 1
DIST-CO-RTE-PM: 02-SIS-96-34.5/38.8,88.0/92.0
Work Description: HMA OVERLAY, REPLACE AC SURFACING, SHOULDER BACKING & TRAFFIC STRIPE.
Location Description: SISKIYOU COUNTY NEAR HAPPY CAMP FROM 0.1 MILE EAST OF OAK FLAT CREEK BRIDGE TO 0.1 MILE EAST OF BENJAMIN CREEK ROAD AND FROM 0.3 MILE WEST OF BEAVER CREEK BRIDGE TO 1.0 MILE WEST OF LUMGREY CREEK BRIDGE
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Austin Henry
Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2021-04-23-25
TL Number from the TL Form: 897290
Sample Submitted By Organization: CT D02 - North Region Materials Lab
Sample Organization Contact: (530) 225-3194
Type of Sample: Verification
Type of Material: Reclaimed Asphalt Pavement
Sample Taken Date: 4/23/2021
Date that the sample was received by the laboratory/organization performing the testing: 4/23/2021
The quantity of what the sample constitutes: JMF Verification
A brief description of the sample: Combined RAP (1/2-inch)
From where was the sample collected: Source
Laboratory sample identification: D78784B
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Northstate Asphalt - Redding, CA

Material Information

RAP Source: Northstate Asphalt, Redding, CA
Aggregate Size: 1/2-inch
Aggregate Source:
RAP Stockpile:
Stockpile Size (tons):

Test Information

DIME Test ID: 2021-04-23-25-3
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Date Tested: 4/27/2021
Verified Date: 6/24/2021
Submitted By Organization: CT D02 - North Region Materials Lab
Organization Address: 1657 Riverside Dr,MS-83
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: (530) 225-3194
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified :

Submitted Test Results

Number of tests: 1
Mass Determination: Air
Method Performed: Mechanical Agitation - Method A
Mass of container filled with water: 7336.6 grams
Mass of oven-dry sample in air for Sample 1: 1676.0 grams
Mass of container filled with the sample and water for Sample 1: 8353.8 grams
Temperature of Water: 76 °F
Specific Gravity for Sample 1: 2.544