Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 215415 DEA: 101L2204 EFIS: 1020000125
QA Service Level: 1
DIST-CO-RTE-PM: 10-AMA-88-14.4/15.0,16.7/17.0
Work Description: COLD PLANE, AND OVERLAY WITH HMA.
Location Description: AMADOR COUNTY IN AND NEAR JACKSON FROM BROADWAY TO 0.1 MILE EAST OF COURT STREET AND FROM ROCKY CREEK BRIDGE TO 0.1 MILE EAST OF DALTON ROAD
Contractor Name: GEORGE REED INC - MYERS AND SONS CONSTRUCTION LP JV
Contractor Address: 140 Empire Avenue, Modesto, CA 95352
Resident Engineer: Iqbal Aulakh Structure Rep.: Unknown
DIME Sample ID: 2021-06-14-21
TL Number from the TL Form: 760563
Sample Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Sample Organization Contact: (916) 227-7302
Type of Sample: Acceptance
Type of Material: Asphalt Binder
Sample Taken Date: 06/14/2021
Date that the sample was received by the laboratory/organization performing the testing: 06/21/2021
The quantity of what the sample constitutes: 1 OF 1 CAN
A brief description of the sample: ASPHALT BINDER
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: MARATHON ELK GROVE
Performance Grade: PG 64-16
Modified: No
Lot number:
Sublot number:
Tank number:
Time of sample:
HMA Supplier: GEORGE REED INC
Certified Asphalt Supplier: Marathon Petroleum Co. LP - Elk Grove CA
Multigrade: No
Multigrade Type:
Asphalt Binder Mix Number:
DIME Test ID: 2021-06-14-21-1
Test Method: AASHTO T240-17: Standard Method of Test for Effect of Heat and Air on a Moving Film of Asphalt Binder (Rolling Thin-Film Oven Test)
Verified Date: 07/07/2021
Date Tested: 06/25/2021
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard, Room 225,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test: Per 2018 Standard Specifications
Test Result Compliance: complies
Additional Comments When Verified:
Is mass change based on one or two containers?
|
Two
|
Any material loss from containers during heating process/testing?
|
No
|
Mass of empty container #1
|
170.018 grams
|
Mass of empty container #2
|
161.257 grams
|
Mass of container #1 before test (m1i)
|
205.040 grams
|
Mass of container #2 before test (m2i)
|
196.103 grams
|
Mass of container #1 after test (m1f)
|
204.946 grams
|
Mass of container #2 after test (m2f)
|
196.042 grams
|
Average mass change
|
-0.222 percent
|
DIME Test ID: 2021-06-14-21-2
Test Method: AASHTO T315-16: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Verified Date: 06/29/2021
Date Tested: 06/24/2021
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard, Room 225,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test: ORIG
Test Result Compliance: complies
Additional Comments When Verified:
Phase
|
Original binder
|
Test Plate Diameter
|
25 mm
|
Test Gap
|
1 mm
|
Test Frequency
|
10.0 rad/s
|
Strain Amplitude
|
12.00 %
|
Stress Amplitude
|
0.167 kPa
|
Phase Angle (δ) (for the 10 cycles)
|
87.3 degree
|
Complex Modulus (G*) (for the 10 measurements)
|
1.395 kPa
|
Test Temperature (Specimen 1)
|
64.0 C
|
Dynamic Shear, G*/sin(δ)
|
1.40 kPa
|
DIME Test ID: 2021-06-14-21-3
Test Method: AASHTO T315-16: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Verified Date: 06/29/2021
Date Tested: 06/24/2021
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard, Room 225,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test: RTFO
Test Result Compliance: complies
Additional Comments When Verified:
Phase
|
RTFO residue
|
Test Plate Diameter
|
25 mm
|
Test Gap
|
1 mm
|
Test Frequency
|
10.0 rad/s
|
Strain Amplitude
|
10.00 %
|
Stress Amplitude
|
0.442 kPa
|
Phase Angle (δ) (for the 10 cycles)
|
83.1 degree
|
Complex Modulus (G*) (for the 10 measurements)
|
4.419 kPa
|
Test Temperature (Specimen 1)
|
64.0 C
|
Dynamic Shear, G*/sin(δ)
|
4.45 kPa
|