Print Report | Back to Test Summary

Testing Report for 2021-06-02-6-1

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

DEA: 021J4504
EFIS: 0220000080
Project ID: 215245
QA Service Level: 1
DIST-CO-RTE-PM: 02-SIS-89-14.0/19.0
Work Description: PLACE HMA (TYPE A).
Location Description: SISKIYOU COUNTY ABOUT 6 MILES NORTH OF BARTLE FROM 0.4 MILE NORTH OF EDISON CREEK ACCESS ROAD TO 2.0 MILES SOUTH OF MUD CREEK BRIDGE
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Austin Henry
Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2021-06-02-6
TL Number from the TL Form: 858980
Sample Submitted By Organization: CT D02 - North Region Materials Lab
Sample Organization Contact: (530) 225-3194
Type of Sample: Acceptance
Type of Material: Aggregate
Sample Taken Date: 6/2/2021
Date that the sample was received by the laboratory/organization performing the testing: 6/2/2021
The quantity of what the sample constitutes: Production Start-Up Evaluation
A brief description of the sample: Treated Virgin 3/8-inch Type A Aggregate
From where was the sample collected: Manufacturer
Laboratory sample identification: D78819A
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: JF Shea Construction, Fawndale Rock and Asphalt, Redding, CA

Material Information

Source Identification (SMARA or name of Pit): 91-45-0017
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: Sampling device at plant
Where the material sample would have been placed if not sampled:
Primary Aggregate Nominal Size: 3/8 inch
The concrete mix design number:
Lot number:
Sublot number:

Test Information

DIME Test ID: 2021-06-02-6-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Date Tested: 6/4/2021
Verified Date: 8/19/2021
Submitted By Organization: CT D02 - North Region Materials Lab
Organization Address: 1657 Riverside Dr,MS-83
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: (530) 225-3194
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified :

Submitted Test Results

What type of gradation is being tested?: HMA Gradation
Does this test use 1/4 sieve? (question for HMA Gradation Type): Yes
Total mass of material in the sample: 1518.8 grams
Cumulative mass retained on the 1 1/2 in. sieve: no data
Cumulative mass retained on the 1 in. sieve: no data
Cumulative mass retained on the 3/4 in. sieve: no data
Cumulative mass retained on the 1/2 in. sieve: no data
Cumulative mass retained on the 3/8 in. sieve: 83 grams
Mass retained on the 1/4 in. sieve: 520 grams
Cumulative mass retained on the #4 sieve: 778 grams
Total sample mass passing the #4 sieve: 743 grams
Total mass of fine material in the sample: 522.5 grams
Cumulative mass retained on the #8 sieve: 346.2 grams
Cumulative mass retained on the #16 sieve: 450.4 grams
Cumulative mass retained on the #30 sieve: 465.8 grams
Cumulative mass retained on the #50 sieve: 471.9 grams
Cumulative mass retained on the #100 sieve: 480.2 grams
Cumulative mass retained on the #200 sieve: 487.8 grams
Cumulative percent passing the 1 1/2 in. sieve: 100 %
Cumulative percent passing the 1 in. sieve: 100 %
Cumulative percent passing the 3/4 in. sieve: 100 %
Cumulative percent passing the 1/2 in. sieve: 100 %
Cumulative percent passing the 3/8 in. sieve: 94.5 %
Cumulative percent passing the 1/4 in. sieve: 65.8 %
Cumulative percent passing the #4 sieve: 48.8 %
Cumulative percent passing the #8 sieve: 16.5 %
Cumulative percent passing the #16 sieve: 6.7 %
Cumulative percent passing the #30 sieve: 5.3 %
Cumulative percent passing the #50 sieve: 4.7 %
Cumulative percent passing the #100 sieve: 4 %
Cumulative percent passing the #200 sieve: 3.24 %