Print Report | Back to Test Summary

Testing Report for 2021-05-12-43-1

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

DEA: 081G5504
EFIS: 0816000035
Project ID: 214665
QA Service Level: 1
DIST-CO-RTE-PM: 08-SBD-40-R28.9
Work Description: REPLACE WEIGH-IN-MOTION SYSTEM WITH HIGH SPEED WEIGH-IN-MOTION SYSTEM.
Location Description: SAN BERNARDINO COUNTY NEAR NEWBERRY SPRINGS AT 3.6 MILES WEST OF HECTOR ROAD UNDERCROSSING
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Thanh Pham
Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2021-05-12-43
TL Number from the TL Form:
Sample Submitted By Organization: CT - Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Verification
Type of Material: Aggregate
Sample Taken Date: 5/12/2021
Date that the sample was received by the laboratory/organization performing the testing: 5/24/2021
The quantity of what the sample constitutes: 12 Bags Agg., 2 Bags Rap
A brief description of the sample: JMF 3/4" HMA-A-SP R15 0.75% LAS
From where was the sample collected: Manufacturer
Laboratory sample identification: 0299A-21
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Vulcan Materials-Oro Grande

Material Information

Source Identification (SMARA or name of Pit): 91-36-0022/91-36-0046/91-36-00137
The fabricator's/manufacturer's product name for the sample: 3/4 HMA-A-SP R15
The fabricator/manufacturer designation for the sample:
The plant number: 224112 ORO MPC
A detailed description of where the material sample was collected: Belt Cut at Vulcan Oro Grande Plant
Where the material sample would have been placed if not sampled: Asphalt Paving
Primary Aggregate Nominal Size: 3/4 inch
The concrete mix design number:
Lot number:
Sublot number:

Test Information

DIME Test ID: 2021-05-12-43-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Date Tested: 5/27/2021
Verified Date: 6/2/2021
Submitted By Organization: CT - Southern Regional Laboratory
Organization Address: 13970 Victoria St,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: 213-792-4794
General Comments for this Test: Combined Virgin Aggregate Gradation
Test Result Compliance:
Additional Comments When Verified :

Submitted Test Results

What type of gradation is being tested?: HMA Gradation
Does this test use 1/4 sieve? (question for HMA Gradation Type): No
Cumulative percent passing the 1 1/2 in. sieve: 100 %
Cumulative percent passing the 1 in. sieve: 100 %
Cumulative percent passing the 3/4 in. sieve: 96 %
Cumulative percent passing the 1/2 in. sieve: 80 %
Cumulative percent passing the 3/8 in. sieve: 63 %
Cumulative percent passing the #4 sieve: 47 %
Cumulative percent passing the #8 sieve: 38 %
Cumulative percent passing the #16 sieve: 29 %
Cumulative percent passing the #30 sieve: 21 %
Cumulative percent passing the #50 sieve: 13 %
Cumulative percent passing the #100 sieve: 7 %
Cumulative percent passing the #200 sieve: 4 %