Print Report | Back to Test Summary

Testing Report for 2021-05-10-27-2

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

DEA: 101C0404
EFIS: 1017000034
Project ID: 215092
QA Service Level: 1
DIST-CO-RTE-PM: 10-MPA-49-0.3/18.5
Work Description: COLD PLANE, PLACE HMA AND REPLACE RAILING AND OVERSIDE DRAINS.
Location Description: MARIPOSA COUNTY IN AND NEAR MARIPOSA FROM MADERA COUNTY LINE TO SOUTH JUNCTION ROUTE 140
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Stan Oshita
Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2021-05-10-27
TL Number from the TL Form: c994286
Sample Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Sample Organization Contact: (916) 227-7302
Type of Sample: Acceptance
Type of Material: Asphalt Binder
Sample Taken Date: 5/10/2021
Date that the sample was received by the laboratory/organization performing the testing: 5/21/2021
The quantity of what the sample constitutes: 1 of 2 cans
A brief description of the sample: PG64-10
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Teichert - Santa Fe Winton

Material Information

Performance Grade: PG 64-10
Modified: No
Lot number: 1
Sublot number: 1
Tank number:
Time of sample:
HMA Supplier: Teichert - Santa Fe Winton
Asphalt Binder Supplier: Marathon Petroleum Co. LP - Elk Grove CA
Multigrade: No
Multigrade Type:

Test Information

DIME Test ID: 2021-05-10-27-2
Test Method: AASHTO T315-16: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Date Tested: 5/10/2021
Verified Date: 6/1/2021
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test: ORG
Test Result Compliance: complies
Additional Comments When Verified :

Submitted Test Results

Phase: Original binder
Test Plate Diameter: 25 mm
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 12.00 %
Stress Amplitude: 0.232 kPa
Phase Angle (δ) (for the 10 cycles): 83.9 degree
Complex Modulus (G*) (for the 10 measurements): 1.936 kPa
Test Temperature: 64.0 C
Dynamic Shear, G*/sin(δ): 1.95 kPa