Print Report | Back to Sample Detail

Sample Record for 2021-04-09-20

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 214352 DEA: 07332704 EFIS: 0716000290 QA Service Level: 1
DIST-CO-RTE-PM: 07-LA-5-18.3
Work Description: APPLY HIGH FRICTION SURFACE TREATMENT, LANDSCAPE, & IRRIGATION WORK.
Location Description: LOS ANGELES COUNTY IN LOS ANGELES ON ROUTE 5
Contractor Name: WESTCOAST PUBLIC WORKS INC
Contractor Address: 20058 VENTURA BLVD, #318;, WOODLAND HILLS CA 91364
Resident Engineer: Sepand Minovi Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2021-04-09-20
TL Number from the TL Form: Sacramento Caltrans lab
Sample Submitted By Organization: Kwik Bond Polymers
Sample Organization Contact: (760) 518-6064
Type of Sample: Quality Control
Type of Material: Polyester
Sample Taken Date: 04/09/2021
Date that the sample was received by the laboratory/organization performing the testing: 04/09/2021
The quantity of what the sample constitutes: 36 Totes
A brief description of the sample: 1 gallon can
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Kwik Bond Polymers and Polynt

Material Information

Mfg. Lot Number(s): 1322431
Batch number: 1322431
Mix number: 1322431

Test Results

Test 1 of 2

DIME Test ID: 2021-04-09-20-1
Test Method: ASTM D2196-Feb15: Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscometer
Verified Date: 05/28/2021
Date Tested: 05/10/2021
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: spencer.adams@dot.ca.gov
Organization Phone: (916) 227-5716
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Viscosity 2212

Test 2 of 2

DIME Test ID: 2021-04-09-20-2
Test Method: ASTM D638-Dec14: Standard Test Method for Tensile Properties of Plastics
Verified Date: 05/28/2021
Date Tested: 04/15/2021
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: spencer.adams@dot.ca.gov
Organization Phone: (916) 227-5716
General Comments for this Test: Accepted based on supplier results
Test Result Compliance: complies
Additional Comments When Verified:
Number of specimens tested 5
Conditioning procedure 18/25/50+5/70
Speed of testing 0.45 in/min
Sample 1 Width 0.5 in
Sample 1 Ultimate strength 4094.5 psi
Sample 1 Thickness 0.127 in
Sample 1 Area 0.0635 in^2
Sample 1 Ultimate Strength Actual 260 lbs
Sample 1 percent elongation 36 %
Sample 1 Time 0 MM:SS
Sample 2 Width 0.5 in
Sample 2 Thickness 0.126 in
Sample 2 Area 0.063 in^2
Sample 2 Ultimate strength 4000 psi
Sample 2 Ultimate Strength Actual 252 lbs
Sample 2 percent elongation 40 %
Sample 2 Time 0 MM:SS
Sample 3 Width 0.5 in
Sample 3 Thickness 0.126 in
Sample 3 Area 0.063 in^2
Sample 3 Ultimate strength 4015.9 psi
Sample 3 Ultimate Strength Actual 253 lbs
Sample 3 percent elongation 53 %
Sample 3 Time 0 MM:SS
Sample 4 Width 0.5 in
Sample 4 Thickness 0.126 in
Sample 4 Area 0.063 in^2
Sample 4 Ultimate strength 3857.1 psi
Sample 4 Ultimate Strength Actual 243 lbs
Sample 4 percent elongation 25 %
Sample 4 Time 0 MM:SS
Sample 5 Width 0.5 in
Sample 5 Thickness 0.134 in
Sample 5 Area 0.067 in^2
Sample 5 Ultimate strength 3925.4 psi
Sample 5 Ultimate Strength Actual 263 lbs
Sample 5 percent elongation 49 %
Sample 5 Time 0 MM:SS
Ultimate Strength Average 3979 psi
Percent Elongation Average 41 %