Print Report | Back to Sample Detail

Sample Record for 2021-04-30-8

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 215429 DEA: 120S2304 EFIS: 1219000108 QA Service Level: 1
DIST-CO-RTE-PM: 12-ORA-73-10.3/19.5
Work Description: METHACRYLATE DECK SEAL TREATMENT AND POLYESTER CONCRETE OVERLAY
Location Description: ORANGE COUNTY AT VARIOUS LOCATIONS FROM S73-S5 CONNECTOR VIADUCT IN LAGUNA NIGUEL TO SAND CANYON AVENUE UNDERCROSSING IN IRVINE
Contractor Name: PETERSON-CHASE GENERAL ENGINEERING CONSTRUCTION, INC.
Contractor Address: 16351 Construction Circle West, Irvine, CA 92606
Resident Engineer: Christopher Blanco Structure Rep.: Kugan Ramanathan

Sample Information

DIME Sample ID: 2021-04-30-8
TL Number from the TL Form: Sacramento Caltrans lab
Sample Submitted By Organization: Kwik Bond Polymers
Sample Organization Contact: (760) 518-6064
Type of Sample: Quality Control
Type of Material: Polyester
Sample Taken Date: 04/30/2021
Date that the sample was received by the laboratory/organization performing the testing: 04/30/2021
The quantity of what the sample constitutes: 2 tankers
A brief description of the sample: 1 gallon can
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Kwik Bond Polymers and Polynt

Material Information

Mfg. Lot Number(s): 1330214
Batch number: 1330214
Mix number: 1330214

Test Results

Test 1 of 6

DIME Test ID: 2021-04-30-8-1
Test Method: ASTM D1475-Nov13: Standard Test Method For Density of Liquid Coatings, Inks, and Related Products
Verified Date: 05/28/2021
Date Tested: 05/25/2021
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: spencer.adams@dot.ca.gov
Organization Phone: (916) 227-5716
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Density Units pounds/gallons
Liquid Density (pounds per gallon) 8.83

Test 2 of 6

DIME Test ID: 2021-04-30-8-2
Test Method: ASTM D2196-Feb15: Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscometer
Verified Date: 05/28/2021
Date Tested: 05/25/2021
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: spencer.adams@dot.ca.gov
Organization Phone: (916) 227-5716
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Viscosity 103

Test 3 of 6

DIME Test ID: 2021-04-30-8-3
Test Method: ASTM D2369-Jul10: Standard Test Method for Volatile Content of Coatings
Verified Date: 05/28/2021
Date Tested: 05/25/2021
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: spencer.adams@dot.ca.gov
Organization Phone: (916) 227-5716
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Mean of two volatile content determination 47

Test 4 of 6

DIME Test ID: 2021-04-30-8-5
Test Method: SCAQMD 309-91-Feb93: Determination of Static Volatile Emissions
Verified Date: 05/28/2021
Date Tested: 05/04/2021
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: spencer.adams@dot.ca.gov
Organization Phone: (916) 227-5716
General Comments for this Test: Accepted based on supplier results
Test Result Compliance: complies
Additional Comments When Verified:
Diameter of lid 153.9 mm
Room Temperature 77 f
Tare weight 0 grams
Initial weight 100 grams
Weight at 5 minutes 99.825 grams
Weight at 10 minutes 99.79 grams
Weight at 15 minutes 99.678 grams
Weight at 20 minutes 99.471 grams
Weight at 25 minutes 99.4 grams
Weight at 30 minutes 99.344 grams
Final weight 99.34 grams
Total weight loss 0.66 grams
Calculated radius of gallon can lid in cm 7.695 cm
Lid Factor 53.757 m^2
Volatile emission 35.48 grams/m^2

Test 5 of 6

DIME Test ID: 2021-04-30-8-6
Test Method: CTM 551-August 2012: Method of Test for Determining Suitability of Materials for Overlayment and Repair of Portland Cement Concrete Pavements and Structures
Verified Date: 05/28/2021
Date Tested: 05/05/2021
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: spencer.adams@dot.ca.gov
Organization Phone: (916) 227-5716
General Comments for this Test: Accepted based on suppliers results
Test Result Compliance: complies
Additional Comments When Verified:
Curing history for Sample 1 24hr
Maximum applied load (P) for Sample 1 1613 lb
Span length for Sample 1 9 in
Break location for Sample 1 bond
Specimen defects/notes for Sample 1 no data
Surface type for Sample 1 SSD
Modulus of rupture (R) for Sample 1 806.5 psi
Curing history for Sample 2 24hr
Maximum applied load (P) for Sample 2 1570 lb
Span length for Sample 2 9 in
Break location for Sample 2 bond
Specimen defects/notes for Sample 2 no data
Surface type for Sample 2 SSD
Modulus of rupture (R) for Sample 2 785 psi
Curing history for Sample 3 24hr
Maximum applied load (P) for Sample 3 1760 lb
Span length for Sample 3 9 in
Break location for Sample 3 bond
Specimen defects/notes for Sample 3 no data
Surface type for Sample 3 SSD
Modulus of rupture (R) for Sample 3 880 psi

Test 6 of 6

DIME Test ID: 2021-04-30-8-7
Test Method: ASTM D638-Dec14: Standard Test Method for Tensile Properties of Plastics
Verified Date: 05/28/2021
Date Tested: 05/21/2021
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: spencer.adams@dot.ca.gov
Organization Phone: (916) 227-5716
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Number of specimens tested 6
Conditioning procedure 18/25/50+5/70
Speed of testing 0.45 in/min
Sample 1 Width 0.491 in
Sample 1 Ultimate strength 3230 psi
Sample 1 Thickness 0.247 in
Sample 1 Area 0.1213 in^2
Sample 1 Ultimate Strength Actual 391.8 lbs
Sample 1 percent elongation 53.4 %
Sample 1 Time 3 MM:SS
Sample 2 Width 0.491 in
Sample 2 Thickness 0.25 in
Sample 2 Area 0.1228 in^2
Sample 2 Ultimate strength 3448.7 psi
Sample 2 Ultimate Strength Actual 423.5 lbs
Sample 2 percent elongation 59.4 %
Sample 2 Time 4 MM:SS
Sample 3 Width 0.491 in
Sample 3 Thickness 0.252 in
Sample 3 Area 0.1237 in^2
Sample 3 Ultimate strength 3376.7 psi
Sample 3 Ultimate Strength Actual 417.7 lbs
Sample 3 percent elongation 57.5 %
Sample 3 Time 4 MM:SS
Sample 4 Width 0.491 in
Sample 4 Thickness 0.247 in
Sample 4 Area 0.1213 in^2
Sample 4 Ultimate strength 3424.6 psi
Sample 4 Ultimate Strength Actual 415.4 lbs
Sample 4 percent elongation 58.7 %
Sample 4 Time 4 MM:SS
Sample 5 Width 0.491 in
Sample 5 Thickness 0.252 in
Sample 5 Area 0.1237 in^2
Sample 5 Ultimate strength 3333.9 psi
Sample 5 Ultimate Strength Actual 412.4 lbs
Sample 5 percent elongation 55.9 %
Sample 5 Time 4 MM:SS
Sample 6 Width 0.491 in
Sample 6 Thickness 0.25 in
Sample 6 Area 0.1228 in^2
Sample 6 Ultimate strength 3386 psi
Sample 6 Ultimate Strength Actual 415.8 lbs
Sample 6 percent elongation 51.5 %
Sample 6 Time 3 MM:SS
Ultimate Strength Average 3367 psi
Percent Elongation Average 56 %