Print Report | Back to Test Summary

Testing Report for 2021-04-16-40-3

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

DEA: ASCP
EFIS: ASCP
Project ID: 44444
QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for submitting Sample information for Asphalt Supplier Certification Program.
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown
Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2021-04-16-40
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Sample Organization Contact: (916) 227-7302
Type of Sample: Verification
Type of Material: Asphalt Binder
Sample Taken Date: 4/16/2021
Date that the sample was received by the laboratory/organization performing the testing: 5/18/2021
The quantity of what the sample constitutes: 1 can
A brief description of the sample: PG64-10/16
From where was the sample collected: Source
Laboratory sample identification: 20210416
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Chowchilla Asphalt, Inc

Material Information

Performance Grade: PG 64-16
Modified: No
Lot number:
Sublot number:
Tank number:
Time of sample:
HMA Supplier:
Asphalt Binder Supplier: Chowchilla Asphalt Incorporated - Chowchilla CA
Multigrade: Yes
Multigrade Type:

Test Information

DIME Test ID: 2021-04-16-40-3
Test Method: AASHTO T315-16: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Date Tested: 5/27/2021
Verified Date: 6/3/2021
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test: ORIG
Test Result Compliance: complies
Additional Comments When Verified :

Submitted Test Results

Phase: Original binder
Test Plate Diameter: 25 mm
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 12.00 %
Stress Amplitude: 0.138 kPa
Phase Angle (δ) (for the 10 cycles): 89.4 degree
Complex Modulus (G*) (for the 10 measurements): 1.154 kPa
Test Temperature: 64.0 C
Dynamic Shear, G*/sin(δ): 1.15 kPa