Sample Record for 2021-04-01-25
Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project Information
Project ID: 212914 DEA: 031E0604 EFIS: 0312000068
QA Service Level: 1
DIST-CO-RTE-PM: 03-YUB-70-15.5/16.5
Work Description: SIMMERLY SLOUGH BRIDGE REPLACEMENT BR 16-0019 WITH BR 16-0055.
Location Description: NEAR MARYSVILLE, FROM 0.1 MILE NORTH OF BINNEY JUNCTION UNDERPASS TO 0.3 MILE NORTH OF LAURELLEN ROAD, AT SIMMERLY SLOUGH BRIDGE BR 16-0019.
Contractor Name: MCM Construction
Contractor Address: PO Box 620, North Highlands, Ca 95660
Resident Engineer: Manoharan Selvendran Structure Rep.: Travis Christie
Sample Information
DIME Sample ID: 2021-04-01-25
TL Number from the TL Form: C706328
Sample Submitted By Organization: CT D03 - Olivehurst Northern Regional Laboratory
Sample Organization Contact: (530) 741-4238
Type of Sample: Verification
Type of Material: Hot Mix Asphalt
Sample Taken Date: 04/01/2021
Date that the sample was received by the laboratory/organization performing the testing: 04/01/2021
The quantity of what the sample constitutes: JMF Verification
A brief description of the sample: 3/4" HMA - A w/RAP
From where was the sample collected: Manufacturer
Laboratory sample identification: JMF21-020A
Structure unique identifier:
Structure name: Not Applicable
The fabricator/manufacturer/facility name: Teichert-Hallwood Drum Plant
Material Information
HMA Type: Type A HMA
HMA Grading: 3/4 inch
Lot number:
Sublot number:
HMA Mix Number:
Test Results
Test 1 of 7
DIME Test ID: 2021-04-01-25-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 05/04/2021
Date Tested: 04/19/2021
Submitted By Organization: CT D03 - Olivehurst Northern Regional Laboratory
Organization Address: 5330 Arboga Road,
Organization City: Olivehurst
Organization State: CA
Organization Zipcode: 95961
Organization Email: jeff.herbert@dot.ca.gov
Organization Phone: (530) 741-4238
General Comments for this Test: JMF21-020A.
Test Result Compliance: complies
Additional Comments When Verified: JMF21-020A
What temperature unit is used?
|
Fahrenheit
|
Test procedure used?
|
no data
|
Mass of HMA Sample prior to ignition
|
no data
|
Corrected Asphalt Binder Content
|
5.15 %
|
Mass Loss
|
no data
|
Correction Factor (Percent by mass of HMA Specimen)
|
no data
|
Moisture Content
|
no data
|
Temperature Compensation Factor
|
no data
|
Test Temperature
|
no data
|
Test 2 of 7
DIME Test ID: 2021-04-01-25-2
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 05/04/2021
Date Tested: 04/19/2021
Submitted By Organization: CT D03 - Olivehurst Northern Regional Laboratory
Organization Address: 5330 Arboga Road,
Organization City: Olivehurst
Organization State: CA
Organization Zipcode: 95961
Organization Email: jeff.herbert@dot.ca.gov
Organization Phone: (530) 741-4238
General Comments for this Test: JMF21-020A.
Test Result Compliance: not applicable
Additional Comments When Verified: JMF21-020A. Report Only
Number of tests
|
1
|
What is the unit of measurement for theoretical density?
|
US Units
|
Mass Determination
|
Air
|
Method Performed
|
Mechanical Agitation - Method A
|
Mass of container filled with water
|
7345.2 grams
|
Mass of oven-dry sample in air for Sample 1
|
2303.0 grams
|
Mass of container filled with the sample and water for Sample 1
|
8759.2 grams
|
Temperature of Water
|
77 °F
|
Specific Gravity for Sample 1
|
2.591
|
Theoretical maximum density at 25°C (77°F)
|
no data
|
Test 3 of 7
DIME Test ID: 2021-04-01-25-3
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 05/04/2021
Date Tested: 04/20/2021
Submitted By Organization: CT D03 - Olivehurst Northern Regional Laboratory
Organization Address: 5330 Arboga Road,
Organization City: Olivehurst
Organization State: CA
Organization Zipcode: 95961
Organization Email: jeff.herbert@dot.ca.gov
Organization Phone: (530) 741-4238
General Comments for this Test: JMF21-020A.
Test Result Compliance: not applicable
Additional Comments When Verified: JMF21-020A
Bulk Specific Gravity
|
2.481
|
Bulk Specific Gravity 2
|
2.477
|
Bulk Specific Gravity 3
|
2.476
|
Average Bulk Specific Gravity
|
2.478
|
Test 4 of 7
DIME Test ID: 2021-04-01-25-4
Test Method: AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)
Verified Date: 05/04/2021
Date Tested: 04/20/2021
Submitted By Organization: CT D03 - Olivehurst Northern Regional Laboratory
Organization Address: 5330 Arboga Road,
Organization City: Olivehurst
Organization State: CA
Organization Zipcode: 95961
Organization Email: jeff.herbert@dot.ca.gov
Organization Phone: (530) 741-4238
General Comments for this Test: JMF21-020A.
Test Result Compliance: complies
Additional Comments When Verified: JMF21-020A
Percent Air Voids
|
4.2 %
|
Percent Air Voids 2
|
4.4
|
Percent Air Voids 3
|
4.4
|
Percent Air Voids Average
|
4.4
|
Test 5 of 7
DIME Test ID: 2021-04-01-25-5
Test Method: AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)
Verified Date: 05/04/2021
Date Tested: 04/21/2021
Submitted By Organization: CT D03 - Olivehurst Northern Regional Laboratory
Organization Address: 5330 Arboga Road,
Organization City: Olivehurst
Organization State: CA
Organization Zipcode: 95961
Organization Email: jeff.herbert@dot.ca.gov
Organization Phone: (530) 741-4238
General Comments for this Test: JMF21-020A.
Test Result Compliance: complies
Additional Comments When Verified: JMF21-020A
Unit system used?
|
SI Units
|
Average Dry Tensile Strength
|
177 psi
|
Average Wet Tensile Strength
|
155 psi
|
Tensile Strength Ratio
|
0.88
|
Test 6 of 7
DIME Test ID: 2021-04-01-25-6
Test Method: AASHTO T324-14: Standard Method of Test for Hamburg Wheel-Track Testing of Compacted Asphalt Mixtures (Hamburg Wheel Track)
Submitted By Organization: CT D03 - Olivehurst Northern Regional Laboratory
Organization Address: 5330 Arboga Road,
Organization City: Olivehurst
Organization State: CA
Organization Zipcode: 95961
Organization Email: jeff.herbert@dot.ca.gov
Organization Phone: (530) 741-4238
This test has been superseded on 06/30/2021.
Reason: corrected
Test 7 of 7
DIME Test ID: 2021-04-01-25-7
Test Method: AASHTO T324-14: Standard Method of Test for Hamburg Wheel-Track Testing of Compacted Asphalt Mixtures (Hamburg Wheel Track)
Verified Date: 06/30/2021
Date Tested: 04/22/2021
Submitted By Organization: CT D03 - Olivehurst Northern Regional Laboratory
Organization Address: 5330 Arboga Road,
Organization City: Olivehurst
Organization State: CA
Organization Zipcode: 95961
Organization Email: jeff.herbert@dot.ca.gov
Organization Phone: (530) 741-4238
General Comments for this Test: JMF21-020A.
Test Result Compliance: complies
Additional Comments When Verified:
Specified minimum number of passes at ½” rut depth, or number of passes at ½” rut depth if applicable (Wheel A)
|
25000
|
Specified minimum number of passes at ½” rut depth, or number of passes at ½” rut depth if applicable (Wheel B)
|
25000
|
Impression at specified number of passes, or specified maximum impression if applicable (Wheel A)
|
7.09 mm
|
Impression at specified number of passes, or specified maximum impression if applicable (Wheel B)
|
7.98 mm
|
Stripping Inflection Point (Wheel A)
|
25000
|
Stripping Inflection Point (Wheel B)
|
25000
|