Print Report | Back to Test Summary

Testing Report for 2021-03-04-28-2

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

DEA: 020H9004
EFIS: 0215000077
Project ID: 213700
QA Service Level: 1
DIST-CO-RTE-PM: 02-BUT-70-41.9/42.3
Work Description: REMOVE CULVERTS AND CONSTRUCT BRIDGE
Location Description: BUTTE COUNTY NEAR PULGA FROM 2.5 MILES WEST OF PENSTOCK UNDERCROSSING TO 2.1 MILES WEST OF PENSTOCK UNDERCROSSING
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: John Yolton
Structure Rep.: Adam Scardaci

Sample Information

DIME Sample ID: 2021-03-04-28
TL Number from the TL Form: 896988
Sample Submitted By Organization: CT D02 - North Region Materials Lab
Sample Organization Contact: (530) 225-3194
Type of Sample: Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 3/4/2021
Date that the sample was received by the laboratory/organization performing the testing: 3/5/2021
The quantity of what the sample constitutes: Production Start-Up Evaluation
A brief description of the sample: Treated 3/4-inch Type A HMA (eq. PG 64-28 M) w/ 15.0 RAP
From where was the sample collected: Manufacturer
Laboratory sample identification: D78751
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Knife River Construction - Orland Plant

Material Information

HMA Type: Type A HMA
HMA Grading: 3/4 inch
Lot number:
Sublot number:

Test Information

DIME Test ID: 2021-03-04-28-2
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Date Tested: 3/8/2021
Verified Date: 4/26/2021
Submitted By Organization: CT D02 - North Region Materials Lab
Organization Address: 1657 Riverside Dr,MS-83
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: (530) 225-3194
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified :

Submitted Test Results

Number of tests: 1
Mass Determination: Air
Method Performed: Mechanical Agitation - Method A
Mass of container filled with water: 7336.6 grams
Mass of oven-dry sample in air for Sample 1: 2509.1 grams
Mass of container filled with the sample and water for Sample 1: 8863.6 grams
Temperature of Water: 77 °F
Specific Gravity for Sample 1: 2.555