Print Report | Back to Sample Detail

Sample Record for 2021-04-16-3

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 215372 DEA: 051J7604 EFIS: 0518000040 MINOR: 05A2246 QA Service Level: 1
DIST-CO-RTE-PM: 05-SLO-101-3.5
Work Description:
Location Description:
Contractor Name: SABU, LLC
Contractor Address: 52 Stargazer Way, Mission Viejo, CA 92692
Resident Engineer: Lilian Bennetzen Structure Rep.: Alex Martinez

Sample Information

DIME Sample ID: 2021-04-16-3
TL Number from the TL Form: na
Sample Submitted By Organization: CT HQ - QASI Bay Area Field Office
Sample Organization Contact: (916) 284-6784
Type of Sample: Quality Assurance
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 04/16/2021
Date that the sample was received by the laboratory/organization performing the testing: 04/16/2021
The quantity of what the sample constitutes: 900
A brief description of the sample: 3/4 x 5.5 A325 Hex Nut (HDG)
From where was the sample collected: Fabricator
Laboratory sample identification: na
Structure unique identifier:
Structure name: na
The fabricator/manufacturer/facility name: Universal Industrial Sales Inc

Material Information

Rocap Number(s): na
Heat Number(s): 10666970
Nut Mfg. Lot Number(s): na
Washer Mfg. Lot Number(s): na
Bolt Specification: A325
Bolt Length(s): 5 1/2"
Nut Specification: na
Washer Specification: na
Finish: HDG
Diameter/Size: 3/4
Bolt Mfg. Lot Number: BG1874
Rocap Test Requirement(s): na
Lubricant Requirements(s): na

Test Results

Test 1 of 12

DIME Test ID: 2021-04-16-3-1
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 04/26/2021
Date Tested: 04/23/2021
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: A325
Test Result Compliance:
Additional Comments When Verified:
Number of Bolt Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)Wedge Angle (deg)CommentsTested By
1ABG18740.750048405215.3210.00A325fsaylor
UTM 450kip
Temperature no data

Test 2 of 12

DIME Test ID: 2021-04-16-3-3
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 04/26/2021
Date Tested: 04/23/2021
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: A325
Test Result Compliance:
Additional Comments When Verified:
Number of Bolt Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)Wedge Angle (deg)CommentsTested By
1BBG18740.750048945217.7210.00A325fsaylor
UTM 450kip
Temperature no data

Test 3 of 12

DIME Test ID: 2021-04-16-3-4
Test Method: ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)
Verified Date: 04/26/2021
Date Tested: 04/23/2021
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number BG1874
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size .75 in
Bolt Length 5.5 in
Pitch Diameter 6.93 in
Pitch Diameter 2nd no data in

Test 4 of 12

DIME Test ID: 2021-04-16-3-5
Test Method: ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)
Verified Date: 04/26/2021
Date Tested: 04/23/2021
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number BG1874
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size .75 in
Bolt Length 5.5 in
Pitch Diameter .701 in
Pitch Diameter 2nd no data in

Test 5 of 12

DIME Test ID: 2021-04-16-3-6
Test Method: ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)
Verified Date: 04/26/2021
Date Tested: 04/23/2021
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number BG1874
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size .75 in
Bolt Length 5.5 in
Pitch Diameter .695 in
Pitch Diameter 2nd no data in

Test 6 of 12

DIME Test ID: 2021-04-16-3-7
Test Method: ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)
Verified Date: 04/26/2021
Date Tested: 04/23/2021
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1D
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number BG1874
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size .75 in
Bolt Length 5.5 in
Pitch Diameter .687 in
Pitch Diameter 2nd no data in

Test 7 of 12

DIME Test ID: 2021-04-16-3-8
Test Method: ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)
Verified Date: 04/26/2021
Date Tested: 04/23/2021
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1E
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number BG1874
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size .75 in
Bolt Length 5.5 in
Pitch Diameter .688 in
Pitch Diameter 2nd no data in

Test 8 of 12

DIME Test ID: 2021-04-16-3-9
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/26/2021
Date Tested: 04/23/2021
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number BG1874
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size .75 in
Bolt Length 5.5 in
Measurement Average 3.96 mils

Test 9 of 12

DIME Test ID: 2021-04-16-3-10
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/26/2021
Date Tested: 04/23/2021
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number BG1874
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size .75 in
Bolt Length 5.5 in
Measurement Average 4.63 mils

Test 10 of 12

DIME Test ID: 2021-04-16-3-11
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/26/2021
Date Tested: 04/23/2021
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number BG1874
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size .75 in
Bolt Length 5.5 in
Measurement Average 4.11 mils

Test 11 of 12

DIME Test ID: 2021-04-16-3-12
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/26/2021
Date Tested: 04/23/2021
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1D
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number BG1874
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size .75 in
Bolt Length 5.5 in
Measurement Average 4.38 mils

Test 12 of 12

DIME Test ID: 2021-04-16-3-13
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/26/2021
Date Tested: 04/23/2021
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1E
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number BG1874
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size .75 in
Bolt Length 5.5 in
Measurement Average 3.99 mils