Print Report | Back to Sample Detail

Sample Record for 2021-03-04-26

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 213700 DEA: 020H9004 EFIS: 0215000077 QA Service Level: 1
DIST-CO-RTE-PM: 02-BUT-70-41.9/42.3
Work Description: REMOVE CULVERTS AND CONSTRUCT BRIDGE
Location Description: BUTTE COUNTY NEAR PULGA FROM 2.5 MILES WEST OF PENSTOCK UNDERCROSSING TO 2.1 MILES WEST OF PENSTOCK UNDERCROSSING
Contractor Name: SHASTA SERVICES INC. DBA
Contractor Address: 509 S. Mt. Shasta Blvd., Mt. Shasta, CA 96067
Resident Engineer: John Yolton Structure Rep.: Adam Scardaci

Sample Information

DIME Sample ID: 2021-03-04-26
TL Number from the TL Form: 896989
Sample Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Sample Organization Contact: (530) 225-3194
Type of Sample: Acceptance
Type of Material: Aggregate
Sample Taken Date: 03/04/2021
Date that the sample was received by the laboratory/organization performing the testing: 03/05/2021
The quantity of what the sample constitutes: Production Start-Up Evaluation
A brief description of the sample: Lime Treated 3/4-inch Type A Aggregate
From where was the sample collected: Manufacturer
Laboratory sample identification: D78752A
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Knife River Construction - Orland Plant

Material Information

Source Identification (SMARA, name of Pit or Job Site): 91-11-0007
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: Cold Feed
Where the material sample would have been placed if not sampled:
Primary Aggregate Nominal Size: 3/4 inch
The concrete mix design number: JMF 20-02-P02
Lot number:
Sublot number:
Aggregate Mix Number:
Test results on following page(s): 1

Test Results

Test 1 of 1

DIME Test ID: 2021-03-04-26-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 04/22/2021
Date Tested: 03/09/2021
Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Organization Address: 1657 Riverside Drive,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: 530-225-3194
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
What type of gradation is being tested? HMA Gradation
Cumulative percent passing the 1 1/2 in. sieve 100 %
Cumulative percent passing the 1 in. sieve 100 %
Cumulative percent passing the 3/4 in. sieve 97.6 %
Cumulative percent passing the 1/2 in. sieve 77.3 %
Cumulative percent passing the 3/8 in. sieve 64.3 %
Cumulative percent passing the 1/4 in. sieve 49.3 %
Cumulative percent passing the #4 sieve 41.9 %
Cumulative percent passing the #8 sieve 26 %
Cumulative percent passing the #16 sieve 16.8 %
Cumulative percent passing the #30 sieve 11.2 %
Cumulative percent passing the #50 sieve 7.3 %
Cumulative percent passing the #100 sieve 4.3 %
Cumulative percent passing the #200 sieve 2.58 %