Print Report | Back to Test Summary

Testing Report for 2021-03-08-17-7

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 44444
QA Service Level:
Work Description: Special project for submitting Sample information for Asphalt Supplier Certification Program.
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown
Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2021-03-08-17
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Sample Organization Contact: (916) 227-7302
Type of Sample: Verification
Type of Material: Asphalt Binder
Sample Taken Date: 3/8/2021
Date that the sample was received by the laboratory/organization performing the testing: 4/19/2021
The quantity of what the sample constitutes: 2 of 2, split sample
A brief description of the sample: Asphalt Binder PG 76-22M
From where was the sample collected: Manufacturer
Laboratory sample identification: 7622M-030821
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Valero NuStar PAT

Material Information

Performance Grade: PG 76-22 M
Modified: Yes
Lot number:
Sublot number:
Tank number: TK 5003
Time of sample: 0600
HMA Supplier:
Asphalt Binder Supplier: Valero-NuStar PAT - Pittsburg CA
Multigrade: No
Multigrade Type:

Test Information

DIME Test ID: 2021-03-08-17-7
Test Method: AASHTO T315-16: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Date Tested: 4/21/2021
Verified Date: 4/23/2021
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email:
Organization Phone: (916) 227-7302
General Comments for this Test: Per 2018 Std Specs RTFO +6
Test Result Compliance: not applicable
Additional Comments When Verified :

Submitted Test Results

Phase: RTFO residue
Test Plate Diameter: 25 mm
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 10.00 %
Stress Amplitude: 0.145 kPa
Phase Angle (δ) (for the 10 cycles): 66.3 degree
Complex Modulus (G*) (for the 10 measurements): 1.448 kPa
Test Temperature (Specimen 1): 82.0 C
Dynamic Shear, G*/sin(δ): 1.58 kPa