Print Report | Back to Test Summary

Testing Report for 2021-04-15-7-1

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

DEA: 030H3424
EFIS: 0317000153
Project ID: 214795
QA Service Level: 1
DIST-CO-RTE-PM: 03-SAC-99-22.6
Work Description: REPLACE BRIDGE DECK WITH PRESTRESSED CONCRETE BOX GIRDER.
Location Description: SACRAMENTO COUNTY IN SACRAMENTO AT 21ST AVENUE UNDERCROSSING
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Howard Giang
Structure Rep.: Brandon Miller

Sample Information

DIME Sample ID: 2021-04-15-7
TL Number from the TL Form:
Sample Submitted By Organization: Con-Fab California Corporation - Lathrop
Sample Organization Contact: 209-249-4700
Type of Sample: Quality Control
Type of Material: Concrete
Sample Taken Date: 4/15/2021
Date that the sample was received by the laboratory/organization performing the testing: 4/16/2021
The quantity of what the sample constitutes: 2 6x12 concrete cylinders
A brief description of the sample: 6x12 concrete cylinders
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Con-Fab California, LLC

Material Information

The concrete mix design number: VER-95LV
The truck number from where the sample was collected:
The batch plant ticket number from where the sample was collected: 3287
Concrete batch plant:
The fabricator/manufacturer designation for the sample:
A detailed description of where the material sample was collected: Bed 2, 2nd Truck
Where the material sample would have been placed if not sampled:
From Lot No.:
Bag Lot No.:

Test Information

DIME Test ID: 2021-04-15-7-1
Test Method: ASTM C39-10: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Date Tested: 4/16/2021
Capped in accordance with: ASTM C1231
Verified Date: 4/16/2021
Submitted By Organization: Con-Fab California Corporation - Lathrop
Organization Address: 1910 E. Lathrop Rd.,
Organization City: Lathrop
Organization State: CA
Organization Zipcode: 95330
Organization Email:
Organization Phone: 209-249-4700
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified :

Submitted Test Results

Unit system used?: US Units
Number of specimens: 2
Test performed: With no density determined
Cross sectional area of cylinder 1: 28.27 in^2
Cross sectional area of cylinder 2: 28.27 in^2
Capped in accordance with?: ASTM C1231
Compressive strength (to nearest 10 psi): 5085 psi
Average diameter of cylinder 1: 6.00 in
Average diameter of cylinder 2: 6.00 in
Maximum load on cylinder 1: 143000 lb
Maximum load on cylinder 2: 144400 lb
Type of fracture pattern of cylinder 1: 2
Type of fracture pattern of cylinder 2: 2
Comment on any defect in either specimen or caps (Max 250 Characters): no data
Correction factor for cylinder 1: 1
Correction factor for cylinder 2: 1
Age of specimen: 1 days