Print Report | Back to Test Summary

Testing Report for 2021-03-11-10-1

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 66667 DEA: JMFPP EFIS: 0019000043 QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for submitting Sample information for JMF Prequalification Program.
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2021-03-11-10
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Hot Mix Asphalt Laboratory
Sample Organization Contact: (916) 227-7302
Type of Sample: Verification
Type of Material: Aggregate
Sample Taken Date: 03/11/2021
Date that the sample was received by the laboratory/organization performing the testing: 04/06/2021
The quantity of what the sample constitutes: 6 bags
A brief description of the sample: 6 bags of combined aggregate
From where was the sample collected: Manufacturer
Laboratory sample identification: 21-JMFPP-0060
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Vulcan Materials Company

Material Information

Source Identification (SMARA or name of Pit): 91-01-0010
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: Bins
Where the material sample would have been placed if not sampled:
Primary Aggregate Nominal Size: 1/2 inch
The concrete mix design number:
Lot number:
Sublot number:

Test Information

DIME Test ID: 2021-03-11-10-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 04/15/2021
Date Tested: 04/12/2021
Submitted By Organization: CT HQ - Sacramento Aggregate Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: bang.d.nguyen@dot.ca.gov
Organization Phone: (916) 227-7204
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified :

Submitted Test Results

What type of gradation is being tested? HMA Gradation
Does this test use 1/4 sieve? (question for HMA Gradation Type) No
Total mass of material in the sample 2879.1 grams
Cumulative mass retained on the 1 1/2 in. sieve 0 grams
Cumulative mass retained on the 1 in. sieve 0 grams
Cumulative mass retained on the 3/4 in. sieve 0 grams
Cumulative mass retained on the 1/2 in. sieve 97.8 grams
Cumulative mass retained on the 3/8 in. sieve 427.5 grams
Cumulative mass retained on the #4 sieve 1280 grams
Total sample mass passing the #4 sieve 1594.5 grams
Total mass of fine material in the sample 896 grams
Cumulative mass retained on the #8 sieve 418.4 grams
Cumulative mass retained on the #16 sieve 629.2 grams
Cumulative mass retained on the #30 sieve 718.9 grams
Cumulative mass retained on the #50 sieve 782.5 grams
Cumulative mass retained on the #100 sieve 832.3 grams
Cumulative mass retained on the #200 sieve 856 grams
Cumulative percent passing the 1 1/2 in. sieve 100 %
Cumulative percent passing the 1 in. sieve 100 %
Cumulative percent passing the 3/4 in. sieve 100 %
Cumulative percent passing the 1/2 in. sieve 96.6 %
Cumulative percent passing the 3/8 in. sieve 85.2 %
Cumulative percent passing the #4 sieve 55.5 %
Cumulative percent passing the #8 sieve 29.6 %
Cumulative percent passing the #16 sieve 16.5 %
Cumulative percent passing the #30 sieve 11 %
Cumulative percent passing the #50 sieve 7 %
Cumulative percent passing the #100 sieve 3.9 %
Cumulative percent passing the #200 sieve 2.48 %