Print Report | Back to Test Summary

Testing Report for 2021-03-25-13-4

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

DEA: 060X0404
EFIS: 0618000013
Project ID: 215147
QA Service Level: 1
DIST-CO-RTE-PM: 06-TUL-65,190-0.0/R15.1,8.0/26.5
Work Description: INSTALL RUMBLE STRIPS.
Location Description: TULARE COUNTY NEAR PORTERVILLE ON ROUTE 65 FROM KERN COUNTY LINE TO 0.5 MILE SOUTH OF AVENUE 124 AND ON ROUTE 190 FROM ROAD 180 TO PLEASANT OAK DRIVE
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Jake Garcia
Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2021-03-25-13
TL Number from the TL Form: C056403
Sample Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Sample Organization Contact: (916) 227-7302
Type of Sample: Acceptance
Type of Material: Asphalt Binder
Sample Taken Date: 3/25/2021
Date that the sample was received by the laboratory/organization performing the testing: 4/5/2021
The quantity of what the sample constitutes: 1 of 1
A brief description of the sample: Asphalt Binder
From where was the sample collected: Other
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Porterville Asphalt

Material Information

Performance Grade: PG 64-10
Modified: No
Lot number:
Sublot number:
Tank number:
Time of sample:
HMA Supplier: Porterville Asphalt
Asphalt Binder Supplier: San Joaquin Refinery - Bakersfield CA
Multigrade:
Multigrade Type:

Test Information

DIME Test ID: 2021-03-25-13-4
Test Method: AASHTO T315-16: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Date Tested: 4/7/2021
Verified Date: 4/8/2021
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test: Per 2018 Std Specs PAV
Test Result Compliance: complies
Additional Comments When Verified :

Submitted Test Results

Phase: PAV residue
Test Plate Diameter: 8 mm
Test Gap: 2 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 1.00 %
Stress Amplitude: 35.934 kPa
Phase Angle (δ) (for the 10 cycles): 67.2 degree
Complex Modulus (G*) (for the 10 measurements): 3593.354 kPa
Test Temperature (Specimen 1): 31.0 C
(G*) x sin(δ)=: 3313 kPa