Print Report | Back to Test Summary

Testing Report for 2021-02-19-33-2

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

DEA: 080F0304
EFIS: 0800020358
Project ID: 213764
QA Service Level: 1
DIST-CO-RTE-PM: 08-SBD-60-R0.7/R3.0
Work Description: REMOVE AND REPLACE THREE OVERCROSSING BRIDGES ON ROUTE 60
Location Description: IN SAN BERNARDINO COUNTY IN AND NEAR CHINO AT VARIOUS LOCATIONS FROM O.1 MILE WEST OF PIPELINE AVENUE OVERCROSSING TO 0.1 MILE EAST OF BENSON AVENUE OVERCROSSING
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Joseph Lopez
Structure Rep.: Rodrigo Santa Cruz

Sample Information

DIME Sample ID: 2021-02-19-33
TL Number from the TL Form: 1003-219
Sample Submitted By Organization: CT - Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Quality Assurance
Type of Material: Concrete
Sample Taken Date: 2/19/2021
Date that the sample was received by the laboratory/organization performing the testing: 3/1/2021
The quantity of what the sample constitutes: 6
A brief description of the sample: CONCRETE CYLINDERS
From where was the sample collected: Job Site
Laboratory sample identification: 1003-219
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Sema Construction Facility

Material Information

The concrete mix design number: RRM18086
The truck number from where the sample was collected: 1830
The batch plant ticket number from where the sample was collected: 6011625
Concrete batch plant:
The fabricator/manufacturer designation for the sample:
A detailed description of where the material sample was collected: pipeline Ave OC stage 2 24 CIDH Piles for Abutment 1 footing
Where the material sample would have been placed if not sampled:
From Lot No.:
Bag Lot No.:

Test Information

DIME Test ID: 2021-02-19-33-2
Test Method: ASTM C39-17a: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Date Tested: 3/19/2021
Verified Date: 4/5/2021
Submitted By Organization: CT - Southern Regional Laboratory
Organization Address: 13970 Victoria St,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: 213-792-4794
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified :

Submitted Test Results

Unit system used?: US Units
Number of specimens: 2
Test performed: With no density determined
Capped in accordance with?: ASTM C617/CTM521
Average diameter of cylinder 1: 5.99 in
Average diameter of cylinder 2: 5.99 in
Cross sectional area of cylinder 1: 28.18 in^2
Cross sectional area of cylinder 2: 28.18 in^2
Compressive strength (to nearest 10 psi): 3740 psi
Maximum load on cylinder 1: 104530 lb
Maximum load on cylinder 2: 106070 lb
Compressive strength of cylinder 1: 3709.4 psi
Type of fracture pattern of cylinder 1: 1
Compressive strength of cylinder 2: 3764.0 psi
Type of fracture pattern of cylinder 2: 2
Comment on any defect in either specimen or caps (Max 250 Characters): no data
Correction factor for cylinder 1: 1
Correction factor for cylinder 2: 1
Age of specimen: 28 days
Age of specimen in hours: no data