Print Report | Back to Test Summary

Testing Report for 2021-03-12-12-1

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

DEA: 034F8104
EFIS: 0314000291
Project ID: 214900
QA Service Level: 1
DIST-CO-RTE-PM: 03-GLE-32-L0.0/R0.3,0.1/0.9
Work Description: CONSTRUCT SIDEWALKS, CURB RAMPS, & DRIVEWAYS.
Location Description: GLENN COUNTY IN ORLAND AT VARIOUS LOCATIONS FROM ROUTE 5 SOUTHBOUND OFF RAMP TO ROUTE 32 TO NINTH STREET/TEHAMA STREET AND FROM FOURTH STREET TO WOODWARD AVENUE
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Ryan Johnson
Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2021-03-12-12
TL Number from the TL Form: C778174
Sample Submitted By Organization: CT D03 - North Region Materials Lab
Sample Organization Contact: (530) 741-4238
Type of Sample: Verification
Type of Material: Aggregate
Sample Taken Date: 3/12/2021
Date that the sample was received by the laboratory/organization performing the testing: 3/12/2021
The quantity of what the sample constitutes: JMF Verification
A brief description of the sample: 3/4" sized untreated virgin aggregates
From where was the sample collected: Manufacturer
Laboratory sample identification: JMF21-003
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Knife River Construction - Orland Drum Plant

Material Information

Source Identification (SMARA or name of Pit): 91-11-0007
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: Cold Feed
Where the material sample would have been placed if not sampled:
Primary Aggregate Nominal Size: 3/4 inch
The concrete mix design number:
Lot number:
Sublot number:

Test Information

DIME Test ID: 2021-03-12-12-1
Test Method: AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)
Date Tested: 2/9/2021
Verified Date: 4/1/2021
Submitted By Organization: CT D03 - North Region Materials Lab
Organization Address: 5330 Arboga Rd,
Organization City: Olivehurst
Organization State: CA
Organization Zipcode: 95961
Organization Email: jeff.herbert@dot.ca.gov
Organization Phone: (530) 741-4238
General Comments for this Test: JMF21-003.
Test Result Compliance: complies
Additional Comments When Verified :

Submitted Test Results

Method: 2 - Individual Fracture Determination
Aggregate Size and Fracture Type: Coarse 1 and 2 Faced and Fine 1 Faced
Weighted average percentage of fractured, coarse, 2 faced particles: 94 %
Weighted average percentage of fractured, coarse, 1 faced particles: 98 %
Percentage of fractured, fine, 1 faced particles tested: 94 %