Print Report | Back to Test Summary

Testing Report for 2021-03-02-23-1

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

DEA: STOCK
EFIS: STOCK
Project ID: 88888
QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for SMTL stock material. Object Code: 1025. J2 DEA: 912680.
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown
Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2021-03-02-23
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (916) 227-7253
Type of Sample: Quality Assurance
Type of Material: SMTL TM2 - Type B Elastomeric Joint Seal
Sample Taken Date: 3/2/2021
Date that the sample was received by the laboratory/organization performing the testing: 3/5/2021
The quantity of what the sample constitutes: 600'
A brief description of the sample: Joint Seal
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Watson Bowman

Material Information

Mfg. Lot Number(s): 0921146
Manufacturer(s): Watson Bowman
Temperature: 72
Humidity: 50
Comments:
Joint Seal Size: 5"

Test Information

DIME Test ID: 2021-03-02-23-1
Test Method: CTM 673-July 2012: Method of Determining Movement Rating of Type B1 and B2 Preformed Elastomeric Joint Seals
Date Tested: 3/17/2021
Verified Date: 4/6/2021
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified :

Submitted Test Results

UTM: 2KIP
Temperature: 72 f
Humidity: 50 %
Spec Minimum Uncompressed Width: 5.1 in
Area (5 Times of the Height of Contact Face): 24.8575 sqin
Half of the Spec Minimum Uncompressed Width: no data
85 Percent of the Spec Minimum Uncompressed Width: 4.9715 in
3 Times of the Area: no data
4 Times of the Load at W1: no data
W1 (US Units): 4.29 in
W1 (Metric Units): 108.88 millimeters
W2 (US Units): 2.09 in
W2 (Metric Units): 53.03 millimeters
Satisfactory of MR of (US Units): 2.1989 in
Satisfactory of MR of (Metric Units): 55.85 millimeters
Optional W1 Measurement 1: no data
Optional W1 Measurement 2: no data