Print Report | Back to Sample Detail

Sample Record for 2021-03-04-2

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 214686 DEA: 030H4004 EFIS: 0315000164 QA Service Level: 1
DIST-CO-RTE-PM: 03-NEV,PLA,YOL-80-VAR
Work Description: REPLACE ELECTRICAL SIGNS & INSTALL FIBER OPTIC COMMUNICATION LINES.
Location Description: NEVADA, PLACER AND YOLO COUNTIES AT VARIOUS LOCATIONS
Contractor Name: ALFARO COMMUNICATIONS CONSTRUCTION, INC
Contractor Address: 15614 S ATLANTIC AVENUE, COMPTON CA 90221
Resident Engineer: Rakesh Chander Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2021-03-04-2
TL Number from the TL Form: na
Sample Submitted By Organization: CT HQ - QASI Bay Area Field Office
Sample Organization Contact: (916) 284-6784
Type of Sample: Quality Assurance
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 03/04/2021
Date that the sample was received by the laboratory/organization performing the testing: 03/04/2021
The quantity of what the sample constitutes: 93
A brief description of the sample: 7/8 x 30" A449 Anchor Bolt hardware
From where was the sample collected: Fabricator
Laboratory sample identification: na
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Universal Industrial Sales Inc

Material Information

Rocap Number(s): na
Heat Number(s): 201157
Nut Mfg. Lot Number(s): na
Washer Mfg. Lot Number(s): na
Bolt Specification: A449
Bolt Length(s): 30"
Nut Specification: na
Washer Specification: na
Finish: HDG
Diameter/Size: 7/8"
Bolt Mfg. Lot Number: 33122
Rocap Test Requirement(s): na
Lubricant Requirements(s): na

Test Results

Test 1 of 7

DIME Test ID: 2021-03-04-2-2
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 03/11/2021
Date Tested: 03/10/2021
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) 201157
Mfg. Lot Number 33122
Finish Coating ASTM F2329 - Hot Dip
Product Markings A449
Size .875 in
Bolt Length 30 in
Gage Type Pass

Test 2 of 7

DIME Test ID: 2021-03-04-2-3
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 03/11/2021
Date Tested: 03/10/2021
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) 201157
Mfg. Lot Number 33122
Finish Coating ASTM F2329 - Hot Dip
Product Markings A449
Size .875 in
Bolt Length 30 in
Gage Type Pass

Test 3 of 7

DIME Test ID: 2021-03-04-2-4
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 03/11/2021
Date Tested: 03/10/2021
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) 201157
Mfg. Lot Number 33122
Finish Coating ASTM F2329 - Hot Dip
Product Markings A449
Size .875 in
Bolt Length 30 in
Gage Type Pass

Test 4 of 7

DIME Test ID: 2021-03-04-2-5
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 03/11/2021
Date Tested: 03/10/2021
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) 201157
Mfg. Lot Number 33122
Finish Coating ASTM F2329 - Hot Dip
Product Markings A449
Size .875 in
Bolt Length 30 in
Measurement Average 4.87 mils

Test 5 of 7

DIME Test ID: 2021-03-04-2-6
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 03/11/2021
Date Tested: 03/10/2021
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) 201157
Mfg. Lot Number 33122
Finish Coating ASTM F2329 - Hot Dip
Product Markings A449
Size .875 in
Bolt Length 30 in
Measurement Average 5.69 mils

Test 6 of 7

DIME Test ID: 2021-03-04-2-7
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 03/11/2021
Date Tested: 03/10/2021
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) 201157
Mfg. Lot Number 33122
Finish Coating ASTM F2329 - Hot Dip
Product Markings A449
Size .875 in
Bolt Length 30 in
Measurement Average 4.47 mils

Test 7 of 7

DIME Test ID: 2021-03-04-2-8
Test Method: ASTM F606-14: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)
Verified Date: 03/11/2021
Date Tested: 03/10/2021
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: A449 Headed Bolt 10 Dea
Test Result Compliance:
Additional Comments When Verified:
Number of Samples 1
SampleSizeArea (in^2)Peak Load (lbf)Peak Load (kN)Tensile Strength (psi)Stress at Offset (psi)Load at Offset (lbf)Comments
1UNC 7/8 0.4626337128113715911984055366A449 Headed Bolt 10 Dea
UTM 400kip
Temperature 72