Print Report | Back to Test Summary

Testing Report for 2021-02-09-28-1

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 88888 DEA: STOCK EFIS: STOCK QA Service Level:
Work Description: Special project for SMTL stock material. Object Code: 1025. J2 DEA: 912680.
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2021-02-09-28
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (916) 227-7253
Type of Sample: Quality Assurance
Type of Material: SMTL TM2 - Type B Elastomeric Joint Seal
Sample Taken Date: 02/09/2021
Date that the sample was received by the laboratory/organization performing the testing: 02/05/2021
The quantity of what the sample constitutes: 550'
A brief description of the sample: Joint Seal
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Watson Bowman

Material Information

Mfg. Lot Number(s): 0221128
Manufacturer(s): Watson Bowman
Temperature: 72
Humidity: 50
Joint Seal Size: 3.75"

Test Information

DIME Test ID: 2021-02-09-28-1
Test Method: CTM 673-July 2012: Method of Determining Movement Rating of Type B1 and B2 Preformed Elastomeric Joint Seals
Verified Date: 03/16/2021
Date Tested: 02/10/2021
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email:
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified :

Submitted Test Results

Temperature 72 f
Humidity 50 %
Spec Minimum Uncompressed Width 3.95 in
Area (5 Times of the Height of Contact Face) 18.2525 sqin
Half of the Spec Minimum Uncompressed Width 0 in
85 Percent of the Spec Minimum Uncompressed Width 3.6505 in
3 Times of the Area 0 sqin
4 Times of the Load at W1 0 lbs
W1 (US Units) 3.34 in
W1 (Metric Units) 84.83 millimeters
W2 (US Units) 1.57 in
W2 (Metric Units) 39.98 millimeters
Satisfactory of MR of (US Units) 1.7658 in
Satisfactory of MR of (Metric Units) 44.85 millimeters
Optional W1 Measurement 1 0 in
Optional W1 Measurement 2 0 sqin