Gavin Newsom, Governor |
DEPARTMENT OF TRANSPORTATIONDIVISION OF ENGINEERING SERVICES MATERIALS ENGINEERING AND TESTING SERVICES Concrete Materials Testing Branch 5900 Folsom Blvd. Sacramento, CA 95819 916-227-7205 |
Contract # 033F5104 Cty YUB Rte 20 PM R18.1/R20.1 Vendor # |
REPORT OF LABORATORY TESTING |
||||
Resident Engineer: |
Aaron Chamberlin |
Date Reported: |
03/24/2021 |
|
Address: |
TL Number: |
221220 |
||
City: |
||||
Project Name: Construct bridge, realign curve & widen shoulders. |
||||
Prime Contractor: Flatiron West, Inc. |
||||
Sample Taken Date: |
02/10/2021 |
Mix Design: |
Z5685249 |
|
Contractor: Unknown |
Location: Construction on state highway in Yuba County near Smartsville from the Yuba River Bridge to 0.3 mile east of Smartsville Road. |
|||
Structure unique identifier: |
||||
Structure name: |
||||
Location of Pour: |
The following testing has been tested in accordance with:
ASTM C39-17a : Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Capped in accordance with ASTM C617/CTM521
Specimen | Average diameter of cylinder (in) | Cross sectional area of cylinder (in^2) | Maximum load on cylinder (lb) | Compressive strength of cylinder (psi) | Type of fracture pattern of cylinder |
---|---|---|---|---|---|
1 | 5.99 | 28.18 | 127381 | 4520.0 | 1 |
2 | 5.99 | 28.18 | 132209 | 4692.0 | 1 |
DIME Test ID: 2021-02-10-11-1
Number of specimens: 2
Compressive strength (to nearest 10 psi): 4610
Age of specimen: 12 days
Certified By: Mike Mullins
ASTM C39-17a : Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Capped in accordance with ASTM C617/CTM521
Specimen | Average diameter of cylinder (in) | Cross sectional area of cylinder (in^2) | Maximum load on cylinder (lb) | Compressive strength of cylinder (psi) | Type of fracture pattern of cylinder |
---|---|---|---|---|---|
1 | 5.97 | 27.99 | 153975 | 5501.0 | 1 |
2 | 5.97 | 27.99 | 154973 | 5536.0 | 1 |
DIME Test ID: 2021-02-10-11-2
Number of specimens: 2
Compressive strength (to nearest 10 psi): 5520
Age of specimen: 28 days
Certified By: Mike Mullins
ASTM C39-17a : Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Capped in accordance with ASTM C617/CTM521
Specimen | Average diameter of cylinder (in) | Cross sectional area of cylinder (in^2) | Maximum load on cylinder (lb) | Compressive strength of cylinder (psi) | Type of fracture pattern of cylinder |
---|---|---|---|---|---|
1 | 5.97 | 27.99 | 162902 | 5820.0 | 1 |
2 | 5.96 | 27.9 | 165222 | 5922.0 | 1 |
DIME Test ID: 2021-02-10-11-3
Number of specimens: 2
Compressive strength (to nearest 10 psi): 5870
Age of specimen: 42 days
Certified By: Mike Mullins
*Subject to final inspection by the Resident Engineer. |
TL- Report of Laboratory Testing