Print Report | Back to Test Summary

Testing Report for 2021-01-20-22-1

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 215129 DEA: 050N73U4 EFIS: 0520000166 QA Service Level: 1
DIST-CO-RTE-PM: 05-SB-101-7.3/9.6
Work Description: Segment 4C - Summerland: Construct HOV lanes and rehabilitation. Source inspection of sign structure trusses, lighting structures, steel soldier piles, epoxy coated rebar, headed rebar, welded hoops, column pins.
Location Description: SUMMERLAND FROM 0.2 MILES NORTH OF PARDARO LANE OVERCROSSING TO SAN YSIDRO CREEK BRIDGE
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Tristan Gebhart Structure Rep.: Bernardo Hernandez

Sample Information

DIME Sample ID: 2021-01-20-22
TL Number from the TL Form:
Sample Submitted By Organization: Sequoia Consultant
Sample Organization Contact: 1 (714) 974-6316
Type of Sample: Quality Control
Type of Material: Concrete
Sample Taken Date: 01/20/2021
Date that the sample was received by the laboratory/organization performing the testing: 01/21/2021
The quantity of what the sample constitutes: 100 cy
A brief description of the sample: 6x12 concrete cylinders
From where was the sample collected: Job Site
Laboratory sample identification:
Structure unique identifier:
Structure name: Sheffield Abutment 4 Footing
The fabricator/manufacturer/facility name: Hanson Goleta

Material Information

The concrete mix design number: 725A1M0P
The truck number from where the sample was collected: 314
The batch plant ticket number from where the sample was collected: 38248
Concrete batch plant: Hanson Goleta
The fabricator/manufacturer designation for the sample:
A detailed description of where the material sample was collected: truck chute
Where the material sample would have been placed if not sampled: Sheffield Abutment 4 Footing
From Lot No.:
Bag Lot No.:

Test Information

DIME Test ID: 2021-01-20-22-1
Test Method: CTM 521-June 2020: Method of Test for Compressive Strength of Molded Concrete Cylinders
Verified Date: 02/17/2021
Date Tested: 02/17/2021
Submitted By Organization: Sequoia Consultant
Organization Address: 361 W Grove Ave,
Organization City: Orange
Organization State: CA
Organization Zipcode: 92865
Organization Email: sranjan@sequoiacon.com
Organization Phone: 1 (714) 974-6316
General Comments for this Test: Set 2
Test Result Compliance:
Additional Comments When Verified :

Submitted Test Results

Unit system used? US Units
Number of specimens 2
Test performed With no density determined
Capped in accordance with? ASTM C617/CTM521
Average diameter of cylinder 1 6.00 in
Average diameter of cylinder 2 6.00 in
Cross sectional area of cylinder 1 28.27 in^2
Cross sectional area of cylinder 2 28.27 in^2
Compressive strength (to nearest 10 psi) 4820 psi
Maximum load on cylinder 1 138540 lb
Maximum load on cylinder 2 133840 lb
Type of fracture pattern of cylinder 1 5
Type of fracture pattern of cylinder 2 3
Comment on any defect in either specimen or caps (Max 250 Characters) no data
Correction factor for cylinder 1 1
Correction factor for cylinder 2 1
Age of specimen 28 days
Age of specimen in hours 0 hours