Print Report | Back to Test Summary

Testing Report for 2020-07-22-57-3

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

DEA: 031G7004
EFIS: 0319000135
Project ID: 214802
QA Service Level: 1
DIST-CO-RTE-PM: 03-SUT-99-28.0/30.6
Work Description: COLD PLANE AC PAVEMENT, RHMA OVERLAY, & INDUCTIVE LOOP DETECTORS.
Location Description: SUTTER COUNTY IN AND NEAR YUBA CITY FROM 0.1 MILE NORTH OF SMITH ROAD TO ROUTE 20
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Selvendran Manoharan
Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2020-07-22-57
TL Number from the TL Form:
Sample Submitted By Organization: CT D03 - North Region Materials Lab
Sample Organization Contact: (530) 741-4238
Type of Sample: Verification
Type of Material: Hot Mix Asphalt
Sample Taken Date: 7/22/2020
Date that the sample was received by the laboratory/organization performing the testing: 7/22/2020
The quantity of what the sample constitutes: JMF Verification
A brief description of the sample: 3/4" RHMA-G
From where was the sample collected: Manufacturer
Laboratory sample identification: JMF20-030
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: DeSilva Gates Aggregates-Marysville

Material Information

HMA Type: RHMA-G
HMA Grading: 3/4 inch
Lot number:
Sublot number:

Test Information

DIME Test ID: 2020-07-22-57-3
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Date Tested: 7/22/2020
Verified Date: 2/9/2021
Submitted By Organization: CT D03 - North Region Materials Lab
Organization Address: 5330 Arboga Rd,
Organization City: Olivehurst
Organization State: CA
Organization Zipcode: 95961
Organization Email: jeff.herbert@dot.ca.gov
Organization Phone: (530) 741-4238
General Comments for this Test: JMF20-030. Report only.
Test Result Compliance: not applicable
Additional Comments When Verified : JMF20-030

Submitted Test Results

Number of tests: 2
Mass Determination: Air
Method Performed: Mechanical Agitation - Method A
Mass of container filled with water: 7346.6 grams
Mass of oven-dry sample in air for Sample 1: 2146.6 grams
Mass of container filled with the sample and water for Sample 1: 8631.2 grams
Mass of container filled with water: 7346.9
Mass of oven-dry sample in air for Sample 2: 2124.0 grams
Mass of container filled with the sample and water for Sample 2: 8617.8 grams
Temperature of Water: 76 °F
Specific Gravity for Sample 1: 2.490
Specific Gravity for Sample 2: 2.490
Average Specific Gravity: 2.490