Print Report | Back to Test Summary

Testing Report for 2021-04-06-10-2

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 215145 DEA: 030H4604 EFIS: 0315000174 QA Service Level: 1
DIST-CO-RTE-PM: 03-PLA-80-2.6/3.1
Work Description: WIDEN ON-RAMP AND REPLACE BRIDGE.
Location Description: PLACER COUNTY IN ROSEVILLE AT THE ATLANTIC STREET ON RAMP
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Justin Kunert Structure Rep.: Anderson, Carl

Sample Information

DIME Sample ID: 2021-04-06-10
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (916) 227-7253
Type of Sample: Quality Assurance
Type of Material: SMTL TM1 - Elastomeric Bearing Pad
Sample Taken Date: 04/06/2021
Date that the sample was received by the laboratory/organization performing the testing: 04/06/2021
The quantity of what the sample constitutes: 1
A brief description of the sample: bearing pad
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Scougal Rubber

Material Information

Mfg. Lot Number(s): 19698-1
Material/Compound/Elastomer ID: na
Samples Representing: 15
Description (size): 4.6"x20"x20"
Comments:
Description (Number of Shims): 8
Type of Bearing Pad: Steel
Description (Thickness of Shims): 14 gage
Manufacturer(s): Scougal Rubber
Batch Number: na

Test Information

DIME Test ID: 2021-04-06-10-1
Test Method: ASTM D2240-05re10: Standard Test Method for Rubber Property - Durometer Hardness
Verified Date: 04/12/2021
Date Tested: 04/07/2021
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified :

Submitted Test Results

UTM 2kip
Humidity 50.00 %
Temperature 72 F
Sample 1 Median Thickness 0.074
Sample 1 Thickness all Within 0.003 inch? Yes
Sample 1 Ultimate Tensile 2855.45 lbf/in^2
Sample 1 Elongation (350% Min) Pass
Sample 2 Median Thickness 0.071
Sample 2 Thickness all Within 0.003 inch? Yes
Sample 2 Ultimate Tensile 2809.96 lbf/in^2
Sample 2 Elongation (350% Min) Pass
Sample 3 Median Thickness 0.074
Sample 3 Thickness all Within 0.003 inch? Yes
Sample 3 Ultimate Tensile 2717.95 lbf/in^2
Sample 3 Elongation (350% Min) Pass
Median of the Ultimate Tensile Values 2810 lbf/in^2