Print Report | Back to Test Summary

Testing Report for 2021-01-28-5-4

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 99999 DEA: 0322222 QA Service Level:
DIST-CO-RTE-PM: 03-SAC,OMG-888,99,80-0.6-0.6
Work Description: THIS PROJECT RECORD WAS ADDED FOR DIME TESTERS - DATA SUBMITTED FOR THIS PROJECT SHOULD NOT BE USED FOR ANY OTHER PURPOSES.
Location Description: THIS PROJECT RECORD WAS ADDED FOR DIME TESTERS - DATA SUBMITTED FOR THIS PROJECT SHOULD NOT BE USED FOR ANY OTHER PURPOSES.
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2021-01-28-5
TL Number from the TL Form:
Sample Submitted By Organization: CT D03 - North Region Materials Lab
Sample Organization Contact: (530) 741-4238
Type of Sample: Verification
Type of Material: Aggregate
Sample Taken Date: 01/28/2021
Date that the sample was received by the laboratory/organization performing the testing: 01/29/2021
The quantity of what the sample constitutes: 8 Bags
A brief description of the sample: JMF 4 bins Virgin Aggregate
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Syar Industries Inc

Material Information

Source Identification (SMARA or name of Pit): 91-48-0002
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: Hot Bins
Where the material sample would have been placed if not sampled:
Primary Aggregate Nominal Size: 1/2 inch
The concrete mix design number:
Lot number:
Sublot number:

Test Information

DIME Test ID: 2021-01-28-5-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 01/29/2021
Date Tested: 01/29/2021
Submitted By Organization: CT D03 - North Region Materials Lab
Organization Address: 5330 Arboga Rd,
Organization City: Olivehurst
Organization State: CA
Organization Zipcode: 95961
Organization Email: jeff.herbert@dot.ca.gov
Organization Phone: (530) 741-4238
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified :

Submitted Test Results

What type of gradation is being tested? HMA Gradation
Does this test use 1/4 sieve? (question for HMA Gradation Type) No
Total mass of material in the sample 3831.7 grams
Cumulative mass retained on the 1 1/2 in. sieve 0 grams
Cumulative mass retained on the 1 in. sieve 0 grams
Cumulative mass retained on the 3/4 in. sieve 0 grams
Cumulative mass retained on the 1/2 in. sieve 0 grams
Cumulative mass retained on the 3/8 in. sieve 0 grams
Cumulative mass retained on the #4 sieve 0 grams
Total sample mass passing the #4 sieve 2286.1 grams
Total mass of fine material in the sample 571.1 grams
Cumulative mass retained on the #8 sieve 220.6 grams
Cumulative mass retained on the #16 sieve 332.3 grams
Cumulative mass retained on the #30 sieve 400.2 grams
Cumulative mass retained on the #50 sieve 449.9 grams
Cumulative mass retained on the #100 sieve 499.3 grams
Cumulative mass retained on the #200 sieve 524.5 grams
Cumulative percent passing the 1 1/2 in. sieve 0 %
Cumulative percent passing the 1 in. sieve 0 %
Cumulative percent passing the 3/4 in. sieve 0 %
Cumulative percent passing the 1/2 in. sieve 0 %
Cumulative percent passing the 3/8 in. sieve 0 %
Cumulative percent passing the #4 sieve 0 %
Cumulative percent passing the #8 sieve 0 %
Cumulative percent passing the #16 sieve 0 %
Cumulative percent passing the #30 sieve 0 %
Cumulative percent passing the #50 sieve 0 %
Cumulative percent passing the #100 sieve 0 %
Cumulative percent passing the #200 sieve 0 %