Print Report | Back to Test Summary

Testing Report for 2021-01-12-11-1

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 215355 DEA: 041W4804 EFIS: 0421000028 QA Service Level: 1
DIST-CO-RTE-PM: 04-NAP-121,128-16.08/22.08
Work Description: Fire damage
Location Description: Napa county, routes 121 and 128
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Danilo Patenia Structure Rep.: Nasim, Mohammad

Sample Information

DIME Sample ID: 2021-01-12-11
TL Number from the TL Form: 193414
Sample Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Sample Organization Contact: (916) 227-7283
Type of Sample: Quality Assurance
Type of Material: Concrete
Sample Taken Date: 01/12/2021
Date that the sample was received by the laboratory/organization performing the testing: 01/15/2021
The quantity of what the sample constitutes: 2 cylinders
A brief description of the sample: 6x12 concrete cylinders
From where was the sample collected: Job Site
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Jobsite

Material Information

The concrete mix design number: CT2530
The truck number from where the sample was collected:
The batch plant ticket number from where the sample was collected: 00000000000000000000
Concrete batch plant:
The fabricator/manufacturer designation for the sample:
A detailed description of where the material sample was collected: CHUTE FROM TRUCK
Where the material sample would have been placed if not sampled:
From Lot No.:
Bag Lot No.:

Test Information

DIME Test ID: 2021-01-12-11-1
Test Method: ASTM C39-10: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Capped in accordance with ASTM C617/CTM521
Verified Date: 02/09/2021
Date Tested: 02/09/2021
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email:
Organization Phone: (916) 227-7283
General Comments for this Test:
Additional Comments When Verified :

Submitted Test Results

Unit system used? US Units
Number of specimens 2
Test performed With no density determined
Cross sectional area of cylinder 1 27.99 in^2
Cross sectional area of cylinder 2 27.81 in^2
Capped in accordance with? ASTM C617/CTM521
Compressive strength (to nearest 10 psi) 5720 psi
Average diameter of cylinder 1 5.97 in
Average diameter of cylinder 2 5.95 in
Compressive strength of cylinder 1 5736.9 psi
Compressive strength of cylinder 2 5707.7 psi
Maximum load on cylinder 1 160576 lb
Maximum load on cylinder 2 158731 lb
Type of fracture pattern of cylinder 1 1
Type of fracture pattern of cylinder 2 1
Comment on any defect in either specimen or caps (Max 250 Characters) no data
Correction factor for cylinder 1 1
Correction factor for cylinder 2 1
Age of specimen 28 days