Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 215336 DEA: 051G9804 EFIS: 0516000009
QA Service Level: 1
DIST-CO-RTE-PM: 05-SLO-1-10.0/16.8
Work Description: RHMA (GAP GRADED), RETAINING WALL, CURB RAMPS AND LIGHTING SYSTEMS.
Location Description: SAN LUIS OBISPO COUNTY FROM GRACIA WAY AT OCEANO TO ROUTE 1/101 SEPARATION IN PISMO BEACH.
Contractor Name: CALPORTLAND CONSTRUCTION
Contractor Address: 1625 E DONOVAN RD, SANTA MARIA, CA 93454
Resident Engineer: ALBERT REED Structure Rep.: Sal Heredia
DIME Sample ID: 2020-11-06-8
TL Number from the TL Form: C002425
Sample Submitted By Organization: Wood
Sample Organization Contact: (916) 396-3815
Type of Sample: Per Request
Type of Material: Soil
Sample Taken Date: 11/06/2020
Date that the sample was received by the laboratory/organization performing the testing: 11/18/2020
The quantity of what the sample constitutes: bag of soil
A brief description of the sample: soil
From where was the sample collected: Job Site
Laboratory sample identification: CR20200536
Structure unique identifier: 05-SLO-001-PM 10.0/16.8
Structure name: TP-1
The fabricator/manufacturer/facility name: Caltrans
The fabricator's/manufacturer's product name for the sample: Soll Sample
The fabricator/manufacturer designation for the sample: GDR
A detailed description of where the material sample was collected: 3.0 feet depth
Where the material sample would have been placed if not sampled:
DIME Test ID: 2020-11-06-8-1
Test Method: CTM 643-April 2020: Method for Test for Laboratory Resistivity and pH for Soil and Water
Verified Date: 12/03/2020
Date Tested: 12/01/2020
Submitted By Organization: Wood
Organization Address: 9177 Sky Park Court,
Organization City: San Diego
Organization State: CA
Organization Zipcode: 92123
Organization Email: stephanie.antonucci@woodplc.com
Organization Phone: (916) 396-3815
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Minimum soil resistance corrected to 15.5
|
1433.00 Ohm-cm
|
Minimum soil resistivity at 15.5
|
1433 Ohm-cm
|
Minimum soil resistance of the lab measurement
|
1300 Ohms
|
Soil sample temperature
|
19.6 C
|
pH of soil
|
6.04
|
DIME Test ID: 2020-11-06-8-2
Test Method: CTM 417-June 2014: Method of Testing Soils and Waters for Sulfate Content
Verified Date: 12/03/2020
Date Tested: 12/01/2020
Submitted By Organization: Wood
Organization Address: 9177 Sky Park Court,
Organization City: San Diego
Organization State: CA
Organization Zipcode: 92123
Organization Email: stephanie.antonucci@woodplc.com
Organization Phone: (916) 396-3815
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Material type
|
Soils
|
Amount of the analyte in the sample
|
63
|
DIME Test ID: 2020-11-06-8-3
Test Method: CTM 422-June 2014: Method of Testing Soils and Waters for Chloride Content
Verified Date: 12/03/2020
Date Tested: 12/01/2020
Submitted By Organization: Wood
Organization Address: 9177 Sky Park Court,
Organization City: San Diego
Organization State: CA
Organization Zipcode: 92123
Organization Email: stephanie.antonucci@woodplc.com
Organization Phone: (916) 396-3815
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Material type
|
Soils
|
Amount of the analyte in the sample
|
46
|