Print Report | Back to Sample Detail

Sample Record for 2020-02-14-28

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 214520 DEA: 051H9804 EFIS: 0517000043 QA Service Level: 1
DIST-CO-RTE-PM: 05-SB-101-78.4/79.0
Work Description: ROADWAY EXCAVATION, PLACE AGGREGATE BASE, HMA AND RHMA-G.
Location Description: SANTA BARBARA COUNTY NEAR SANTA MARIA FROM 0.3 MILE SOUTH TO 0.3 MILE NORTH OF SOLOMON SUMMIT UNDERCROSSING
Contractor Name: Calportland Construction
Contractor Address: 1625 E DONOVAN RD, SANTA MARIA
Resident Engineer: Lilian (Poh Chu) Bennetzen Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2020-02-14-28
TL Number from the TL Form:
Sample Submitted By Organization: CalPortland
Sample Organization Contact: (805) 345-3472
Type of Sample: Quality Control
Type of Material: Hot Mix Asphalt
Sample Taken Date: 02/14/2020
Date that the sample was received by the laboratory/organization performing the testing: 02/14/2020
The quantity of what the sample constitutes: 15 kg
A brief description of the sample: Lab Mixed HMA
From where was the sample collected: Other
Laboratory sample identification: 755727228
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: CalPortland Santa Maria

Material Information

HMA Type: Type A HMA
HMA Grading: 1/2 inch
Lot number: Unknown
Sublot number: Unknown
HMA Mix Number:

Test Results

Test 1 of 5

DIME Test ID: 2020-02-14-28-1
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 04/03/2020
Date Tested: 02/14/2020
Submitted By Organization: CalPortland
Organization Address: 1625 East Donovan Road,
Organization City: Santa Maria
Organization State: CA
Organization Zipcode: 93454
Organization Email: pimhoff@calportland.com
Organization Phone: (805) 345-3472
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Number of tests 1
What is the unit of measurement for theoretical density? US Units
Mass Determination Air
Specific Gravity for Sample 1 2.369
Theoretical maximum density at 25°C (77°F) no data

Test 2 of 5

DIME Test ID: 2020-02-14-28-2
Test Method: AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)
Verified Date: 04/03/2020
Date Tested: 02/14/2020
Submitted By Organization: CalPortland
Organization Address: 1625 East Donovan Road,
Organization City: Santa Maria
Organization State: CA
Organization Zipcode: 93454
Organization Email: pimhoff@calportland.com
Organization Phone: (805) 345-3472
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Percent Air Voids 4.0 %
Percent Air Voids 2 4.0 %
Percent Air Voids 3 3.8 %
Percent Air Voids Average 3.9 %

Test 3 of 5

DIME Test ID: 2020-02-14-28-3
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 04/03/2020
Date Tested: 02/14/2020
Submitted By Organization: CalPortland
Organization Address: 1625 East Donovan Road,
Organization City: Santa Maria
Organization State: CA
Organization Zipcode: 93454
Organization Email: pimhoff@calportland.com
Organization Phone: (805) 345-3472
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Bulk Specific Gravity 2.274
Bulk Specific Gravity 2 2.274
Bulk Specific Gravity 3 2.278
Average Bulk Specific Gravity 2.275

Test 4 of 5

DIME Test ID: 2020-02-14-28-4
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Submitted By Organization: CalPortland
Organization Address: 1625 East Donovan Road,
Organization City: Santa Maria
Organization State: CA
Organization Zipcode: 93454
Organization Email: pimhoff@calportland.com
Organization Phone: (805) 345-3472
This test has been superseded on 04/03/2020.
Reason: retested

Test 5 of 5

DIME Test ID: 2020-02-14-28-5
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 04/03/2020
Date Tested: 02/14/2020
Submitted By Organization: CalPortland
Organization Address: 1625 East Donovan Road,
Organization City: Santa Maria
Organization State: CA
Organization Zipcode: 93454
Organization Email: pimhoff@calportland.com
Organization Phone: (805) 345-3472
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
What temperature unit is used? Fahrenheit
Test procedure used? Method A
Mass of HMA Sample prior to ignition 1500.0 g
Corrected Asphalt Binder Content 5.90 %
Mass Loss no data
Correction Factor (Percent by mass of HMA Specimen) 0.00 %
Moisture Content 0.00 %
Temperature Compensation Factor no data
Test Temperature 1000 F