Print Report | Back to Test Summary

Testing Report for 2018-02-27-16-1

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 212679 DEA: 023E7204 EFIS: 0200020154 QA Service Level: 1
DIST-CO-RTE-PM: 02-TEH-36-42.1/46.0
Work Description: COLD PLANING, PAVING, MINOR CONCRETE, ELECTRICAL AND STRIPING WORK.
Location Description: TEHAMA COUNTY IN AND NEAR RED BLUFF FROM EAST SAND SLOUGH BRIDGE TO 0.6 MILE EAST OF STICE ROAD
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Anthony Granados Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2018-02-27-16
TL Number from the TL Form: 852088
Sample Submitted By Organization: CT D02 - North Region Materials Lab
Sample Organization Contact: (530) 225-3194
Type of Sample: Verification
Type of Material: Aggregate
Sample Taken Date: 02/27/2018
Date that the sample was received by the laboratory/organization performing the testing: 02/27/2018
The quantity of what the sample constitutes: JMF
A brief description of the sample: 3/8 inch Untreated Aggregate
From where was the sample collected: Manufacturer
Laboratory sample identification: D77292B
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Tullis, Inc - Northstate Asphalt - Redding, CA

Material Information

Source Identification (SMARA or name of Pit): 91-45-0057::SHASTA RANCH AGGREGATES
The fabricator's/manufacturer's product name for the sample: Unknown
The fabricator/manufacturer designation for the sample: Unknown
The plant number: Unknown
A detailed description of where the material sample was collected: Stockpile @ Plant
Where the material sample would have been placed if not sampled: Unknown
Primary Aggregate Nominal Size: 3/8 inch
The concrete mix design number: Unknown
Lot number:
Sublot number:

Test Information

DIME Test ID: 2018-02-27-16-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 03/27/2018
Date Tested: 02/27/2018
Submitted By Organization: CT D02 - North Region Materials Lab
Organization Address: 1657 Riverside Dr,MS-83
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: (530) 225-3194
General Comments for this Test:
Additional Comments When Verified :

Submitted Test Results

What type of gradation is being tested? HMA Gradation
Does this test use 1/4 sieve? (question for HMA Gradation Type) Yes
Total mass of material in the sample 1365.1 grams
Cumulative mass retained on the 1 1/2 in. sieve 0 grams
Cumulative mass retained on the 1 in. sieve 0 grams
Cumulative mass retained on the 3/4 in. sieve 0 grams
Cumulative mass retained on the 1/2 in. sieve 0 grams
Cumulative mass retained on the 3/8 in. sieve 6 grams
Mass retained on the 1/4 in. sieve 647 grams
Cumulative mass retained on the #4 sieve 1092 grams
Total sample mass passing the #4 sieve 273.1 grams
Total mass of fine material in the sample 273.1 grams
Cumulative mass retained on the #8 sieve 225.9 grams
Cumulative mass retained on the #16 sieve 240.6 grams
Cumulative mass retained on the #30 sieve 246.5 grams
Cumulative mass retained on the #50 sieve 250.2 grams
Cumulative mass retained on the #100 sieve 253.8 grams
Cumulative mass retained on the #200 sieve 257.7 grams
Cumulative percent passing the 1 1/2 in. sieve 100 %
Cumulative percent passing the 1 in. sieve 100 %
Cumulative percent passing the 3/4 in. sieve 100 %
Cumulative percent passing the 1/2 in. sieve 100 %
Cumulative percent passing the 3/8 in. sieve 100 %
Cumulative percent passing the 1/4 in. sieve 53 %
Cumulative percent passing the #4 sieve 20 %
Cumulative percent passing the #8 sieve 3 %
Cumulative percent passing the #16 sieve 2 %
Cumulative percent passing the #30 sieve 2 %
Cumulative percent passing the #50 sieve 2 %
Cumulative percent passing the #100 sieve 1 %
Cumulative percent passing the #200 sieve 1.1 %