*Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Sample Record for 2019-03-04-14


Project Information

Project ID: 66666 DEA: APP EFIS: 0019000052 QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for submitting Sample information for Aggregate Pre-approval Program (APP). Object Code: 1025. J2 DEA: 912680.
Location Description:
Contractor Name: Contractor Address:
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2019-03-04-14
TL Number from the TL Form:
Sample Submitted By Organization: Vulcan Materials Company - Irwindale
Sample Organization Contact: 323-833-8388
Type of Sample: Aggregate Prequalification Program
Type of Material: Aggregate
Sample Taken Date: 03/04/2019
Date that the sample was received by the laboratory/organization performing the testing:
The quantity of what the sample constitutes: 120 lbs
A brief description of the sample: 3/8" Gravel
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:

Material Information

Source Identification (SMARA or name of Pit): 91-19-0023::DURBIN
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: Stockpile Loader Asisted
Where the material sample would have been placed if not sampled:
Primary Aggregate Nominal Size: 3/8 inch
The concrete mix design number:
Lot number:
Sublot number:

Test Results

Test Information 4 of 4

DIME Test ID: 2019-03-04-14-4
Test Method: ASTM C88-5: Standard Test Method for Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate
Verified Date: 11/07/2019
Date Tested: 03/13/2019
Submitted By Organization: Vulcan Materials Company - Irwindale
Organization Address: 16005 Foothill Boulevard
Test General Comments: Total % Loss = 2
Additional Comments When Verified:
What type of solution was used? Sodium sulfate
What was the condition of the solution? Freshly prepared
Mass of sample retained on the 3.5 in. sieve (before immersion) 0 grams
Mass of sample retained on the 3 in. sieve (before immersion) 0 grams
Mass of sample retained on the 2.5 in. sieve (before immersion) 0 grams
Mass of sample retained on the 2 in. sieve (before immersion) 0 grams
Mass of sample retained on the 1.5 in. sieve (before immersion) 0 grams
Mass of sample retained on the 1 in. sieve (before immersion) 0 grams
Mass of sample retained on the 3/4 in. sieve (before immersion) 0 grams
Mass of sample retained on the 1/2 in. sieve (before immersion) 0 grams
Mass of sample retained on the 3/8 in. sieve (before immersion) 331 grams
Mass of sample retained on the #4 sieve (before immersion) 100 grams
Percent loss from sample retained on the 3.5 in. sieve 0 %
Percent loss from sample retained on the 3.0 in. sieve 0 %
Percent loss from sample retained on the 2 ½ in. x 1 ½ in. sieve 0 %
Percent loss from sample retained on the 1 ½ in. x ¾ in. sieve 0 %
Percent loss from sample retained on the ¾ in. x ⅜ in. sieve 0 %
Percent loss from sample retained on the ⅜ in. x No. 4 sieve 1 %
Percent loss from sample retained on the No. 4 x 8 sieve (coarse) 0 %
Percent of split particles between 3/4 in and 1 1/2 in. 0 %
Percent of crumbled particles between 3/4 in and 1 1/2 in. 0 %
Percent of cracked particles between 3/4 in and 1 1/2 in. 0 %
Percent of flaked particles between 3/4 in and 1 1/2 in. 0 %
Percent of split particles between 1 1/2 in and 2 1/2 in. 0 %
Percent of crumbled particles between 1 1/2 in and 2 1/2 in. 0 %
Percent of cracked particles between 1 1/2 in and 2 1/2 in. 0 %
Percent of flaked particles between 1 1/2 in and 2 1/2 in. 0 %
Percent of split particles between 2 1/2 in and 3 in. 0 %
Percent of crumbled particles between 2 1/2 in and 3 in. 0 %
Percent of cracked particles between 2 1/2 in and 3 in. 0 %
Percent of flaked particles between 2 1/2 in and 3 in. 0 %
Percent of split particles between 3 in and 3 1/2 in. 0 %
Percent of crumbled particles between 3 in and 3 1/2 in. 0 %
Percent of cracked particles between 3 in and 3 1/2 in. 0 %
Percent of flaked particles between 3 in and 3 1/2 in. 0 %
Percent of split particles between 3 1/2 in and 4 in. 0 %
Percent of crumbled particles between 3 1/2 in and 4 in. 0 %
Percent of cracked particles between 3 1/2 in and 4 in. 0 %
Percent of flaked particles between 3 1/2 in and 4 in. 0 %